UNSOLVED

shibuya23

updated

21 years ago

S

shibuya23

9 Posts

0

21961

July 14th, 2005 16:00

4700 dell hdd temps at 60?!

how can I improve the cooling on the 4700 box. thanks
  • eqmaven

    70 Posts

    1089

    0

    Posted July 14th, 2005 19:00

    The case fan on the 4700 is setup to blow into the case. There have been various questions about this on the Forums. I have owned many computers and have never seen this method used, and I think for  good reason. Blowing air into the case hardly seems like good cross ventilation, as the hot air from the processor is blown around inside, rather than exhausted as one whould expect.  
    Quick and easy answer, and what I did upon receiving my 4700, is reverse the fan. Case now runs cool to the touch. I'll have to see if it stays that way with a hotter graphics card, beyond the basic ATI 300.  
  • shibuya23

    9 Posts

    1089

    0

    Posted July 14th, 2005 19:00

    thx, so I assumed you just flipped the fan in the big green chimney going off of the cpu heatsink?
  • klbf

    2 Intern

    •

    2713 Posts

    1089

    0

    Posted July 14th, 2005 20:00

    my sata 120 runs at around 34 to 42 42 when it does virus scan
  • shibuya23

    9 Posts

    1089

    0

    Posted July 14th, 2005 20:00

    hehe its a brand new dell I got last week so there isn't no dust in it yet. Still is hot, thinking of getting a pci-e slot fan AND a hdd encloser cooler.
  • shibuya23

    9 Posts

    1089

    0

    Posted July 14th, 2005 20:00

    so after reading other threads I see that the 4700 blows air INTO the the case via the cpu intake(green monster) which means the cpu maybe propery cooled BUT a lot of hot cpu air gets exhausted inside the case for the other parts to be cooled on.

    This coupled with the fact that SATA drives run much hotter is probably why I am seeing such high temps on hdd while my cpu stays cool. crazy.
  • klbf

    2 Intern

    •

    2713 Posts

    1089

    0

    Posted July 14th, 2005 20:00

    60c for a hard drive is alittle high, maybe you need to clean the dust out of the fans, or keep the computer away from being too close to walls,
  • shibuya23

    9 Posts

    1089

    0

    Posted July 14th, 2005 21:00

    apparent the 8300 work "normally" and exhaust cpu air out. 4700 is some weird experiment that intakes cool air outside to cool the cpu in and exhaust hot air in. CPU heat solved BUT everything in the case gets hotter.
  • eqmaven

    70 Posts

    1089

    0

    Posted July 14th, 2005 21:00


    thx, so I assumed you just flipped the fan in the big green chimney going off of the cpu heatsink?

    Yeah. The green shroud comes off easily, then remove the fan bracket, unplug the cord from the MB.
    With the fan shroud unit removed from the case, you need to separate the rubber bumber mounts to remove the fan. Careful with the mounts, push them through with a dull instrument to avoid tearing. Move them to the other side of the fan mount and reverse the fan in the housing. Reassemble and you're done. 
  • klbf

    2 Intern

    •

    2713 Posts

    1089

    0

    Posted July 14th, 2005 21:00

    sorry i have a 8300, i was just commenting about the hard drive temp

    i would have thought the cpu fan is meant to blow out? i'm nnot sure about the side case fan


    ---------
    Dimension 8300 ,P4 CPU 2.80GHz 800MHz BIOS A05 ,1024MB DDR-SDRAM 400MHz ,Sparkle 6600GT 128mb 500mhz/1000mhz ---Retired ---> GeForce FX 5200 ,BearPaw 2400TA Scanner ,USB 2.0 tv tuner ,NEC DVD+RW ND-2100AD ,Pioneer 16x DVD+/-RW DL DVR-109 firmware 1.17m, 256Mb-64mb Usb drives,Wacom graphire3 4x5inch USB tablet ,HP CD-Writer+ 8200,Creative SB Live! with subwoofer ,Conexant SmartHSFi V.9x 56K DF PCI Modem ,ADSL DSL-200, HP deskjet 3550, 120Gb seagate SATA,external usb2 seagate 200Gb ,15inch LCD, 7749 3dmark03, 3200 3dmark05,
  • eqmaven

    70 Posts

    431

    0

    Posted July 22nd, 2005 15:00


    The case fan on the 4700 is setup to blow into the case. There have been various questions about this on the Forums. I have owned many computers and have never seen this method used, and I think for  good reason. Blowing air into the case hardly seems like good cross ventilation, as the hot air from the processor is blown around inside, rather than exhausted as one whould expect.  
    Quick and easy answer, and what I did upon receiving my 4700, is reverse the fan. Case now runs cool to the touch. I'll have to see if it stays that way with a hotter graphics card, beyond the basic ATI 300.  

    Follow up: Recently installed a GeForce 6600 (Gigabyte brand with passive cooling) card in the system. Case not even warm since changing the fan around to exhaust.