
UNSOLVED
N
newVidBloo
23 Posts
0
14672
July 17th, 2005 19:00
2 GB rdram - system never uses more than 523?? - confused newbie here - long, sorry
hi, back in May 2002 when I first got my computer, knowing that I would never figure out how to upgrade later, I splurged bigtime on memory and got the most RDRAM that was being sold - 2GB, all 4 slots filled w 512. Having gotten to know a little more now, sometimes I run some very memory-intensive applications and get to (per Windows Task Manager) 100% of CPU, but when I look at Norton System Doctor, my "memory used" has never gotten above 523 as per that. I'm thinking that for some reason it never looks past the first module?? or some other factor is limiting?? -- please advise!!
here's my system - I think this is right –
dell dimension 8200 bought may or so , 2002
windows XP pro version 2002 at time of purchase ---- windows 5.1 build 2600 - have service pack 1
motherboard Intel 850E
processor Pentium(R) 4 CPU 2.53 GHz - 80532, 2.53G, 512K, 533FSB front side bus, SOFTWARE KOGYO -- driver is Microsoft 7/1/2001, version 5.1.2535.0
2 GB RDRAM / RIMM --- 512, 400M, 288X16, 16C, 40
hard drive, 120G, I, 1N, 7.2K, WD-XL40 -- WDC WD1200JB-75CRA0 driver version 7/1/2001 Microsoft version 5.1.2535.0
Intel(r) 82801BA Bus Master IDE Controller driver is 7/1/2001, driver version 5.1.2600.0
AGP 4X video controller holds a 128 MB Nvidia GeForce4 Ti4600 with TV Out version 6.13
top slot - agp slot – my video card
PCI slots hold
----Ethernet card - Intel Pro 100 PCI Ethernet Network Card
----Adaptec DuoConnect FireWire/USB2 card (system was USB1 only when I got it) - by the way I'm not sure that this works correctly
--Turtle Beach Santa Cruz DSP, Sound Card -- a card with a couple of FirewWire and some other?? port, from my original computer
don't know if it's relevant but in Device Manager, under System Devices, I noticed that Direct Memory Access Controller has no drivers installed.
Please point me to some newbie-friendly sources! websites, books...
here's my system - I think this is right –
dell dimension 8200 bought may or so , 2002
windows XP pro version 2002 at time of purchase ---- windows 5.1 build 2600 - have service pack 1
motherboard Intel 850E
processor Pentium(R) 4 CPU 2.53 GHz - 80532, 2.53G, 512K, 533FSB front side bus, SOFTWARE KOGYO -- driver is Microsoft 7/1/2001, version 5.1.2535.0
2 GB RDRAM / RIMM --- 512, 400M, 288X16, 16C, 40
hard drive, 120G, I, 1N, 7.2K, WD-XL40 -- WDC WD1200JB-75CRA0 driver version 7/1/2001 Microsoft version 5.1.2535.0
Intel(r) 82801BA Bus Master IDE Controller driver is 7/1/2001, driver version 5.1.2600.0
AGP 4X video controller holds a 128 MB Nvidia GeForce4 Ti4600 with TV Out version 6.13
top slot - agp slot – my video card
PCI slots hold
----Ethernet card - Intel Pro 100 PCI Ethernet Network Card
----Adaptec DuoConnect FireWire/USB2 card (system was USB1 only when I got it) - by the way I'm not sure that this works correctly
--Turtle Beach Santa Cruz DSP, Sound Card -- a card with a couple of FirewWire and some other?? port, from my original computer
don't know if it's relevant but in Device Manager, under System Devices, I noticed that Direct Memory Access Controller has no drivers installed.
Please point me to some newbie-friendly sources! websites, books...
Responses (14)
Solutions (0)
HTT Good HT Bad
2 Intern
•
1275 Posts
631
0
Posted July 17th, 2005 21:00
RDram died out because it was slow,ran hot, and it was expensive.Are you sure you bought the right kind of RD-Ram? are you sure there arnet any continuity modules in therenewVidBloo
23 Posts
631
0
Posted July 17th, 2005 21:00
umm, regardless of what I may need, actually I have it already (I was not the person who originally paid for this ) -- under Device Manager it acknowledges that it's in there. And I do load monster video files - I've been backing up VHS stuff to DVD. So I would think that there'd be a way to make use of the RAM unless something?? else is my limiting step and not letting the RAM be in use.
Even for things like running AdAware, I get a *lot* of times, in Task Manager, that 100% of my resources are being utilized. Doesn't it seem as if that shouldn't be happening with so much RAM on board?
I was also wondering, maybe the applications themselves aren't set up somehow to take advantage of that much RAM.
please recommend books or websites so I can educate myself - seems like this was bought when RDRAM was going to be the next big thing, and then it wasn't.HTT Good HT Bad
2 Intern
•
1275 Posts
631
0
Posted July 17th, 2005 23:00
RD ram is going to be used in the XBOX 360newVidBloo
23 Posts
631
0
Posted July 18th, 2005 01:00
hi, all the RDRAM was bought from Dell and came with the original installation of the computer - not a later upgrade. So it's 4 modules of 512 each, no continuity modules, all installed by Dell in 2002. The system acknowledges that it's in there, but never seems to use it.
In my Norton SystemDoctor window, I have utilities for free memory and memory in use, and they always seem to add up correctly to 2 GB. But the memory in use never gets above around 523 that I can figure out (based on updating while checking in Task Manager that yes, indeed, CPU usage is close to 100%). So it isn't even using 2 modules fully.
mombodog, will try your suggestion when I can get back on that computer.-- editing to add, I did it, the results are
physical memory 2096140
available 1689260
system cache 169220
w cpu usage of about 99% at this time per Task Manager
also - commit charge total 260544, limit 4038304, peak 274256
kernel memory total 58264, paged 24448, nonpaged 33816
Qz05, is there a specific component you can recommend that I upgrade? I can try.
even if rdram is expensive, slow, and runs hot - it's what I've got, so I'm eager to try to get full use out of it! But do you think maybe it runs so hot that memory use is inhibited for that reason in some way?
Thanks for your thoughts!Message Edited by newVidBloo on 07-17-2005 09:47 PM
Message Edited by newVidBloo on 07-17-2005 10:06 PM
se7en5ive2
584 Posts
244
0
Posted July 19th, 2005 16:00
RDram was and would still be the fastest ram out there if the company (Rambus) had not gotten greedy with the high pricing. That is the reason the big companies switched to DDR ram to cut cost and increase profit margins. So don't believe that your system isn't competitive in gaming, the ram is not the problem, the 2.8 CPU is capable of handling the high end games fairly easily; so the only real place for improvement would be a high eng AGP video card.
7At idle, your PC should be at about 5%, not 99%. You definitely have something running in the background chewing up CPU cycles.I'm not a fan of anything Norton has to offer and would suggest braking your internet connection and running spyware software and do a full virus scan. I found an AntiVirus called Avast! that is free to home users that found virus's and trojans that Norton and McAfee didn't. You can getit at http://www.avast.com/ just be sure to disable Norton in all it's forms before running.
Message Edited by se7en5ive2 on 07-19-2005 01:47 PM

ejn63
11 Legend
•
87469 Posts
•
321256 Points
631
0
Posted July 17th, 2005 19:00