UNSOLVED

Hopper200456

updated

13 years ago

0

13023

July 4th, 2013 19:00

Alienware X51 Froze and crashed, then stopped giving signal to monitor

Hey guys. So I was playing TF2 (I'm going to give a lot of the details, just to be sure. :P) using Steam Big Picture. (If you don't know, it's a way to run steam by using a controller, and setting all your games to use an external controller. Kinda like making it a console, just on PC with PC games.) While I was playing, the game randomly froze and then crashed after about 30 seconds or so. I restarted the computer, but from here on out, the computer wouldn't send a signal to the monitor. (I forget what type of monitor it is, but I'll check soon. Bear with me.) I've tried a few things (not very many) like turning it off again, and keeping it off for an hour or two, but it didn't help. Any ideas of what to do?
  • 542

    0

    Posted July 4th, 2013 23:00

    Are you sure its not the connector cable? Are you using HDMI 1.4? The experience I've had with the x51 is mixed, but I still love it.

  • NataliaatAW

    2 Intern

    •

    835 Posts

    542

    0

    Posted July 5th, 2013 10:00

    Hello Hopper,

    I agree with ytty13321, you should try a different cable and/or monitor. Check out the video on the bottom of this article for basic "No post" troubleshooting:

    My Alienware Computer is not showing image and is beeping (No POST Beep Codes Table)

  • 542

    0

    Posted July 5th, 2013 15:00

    I'm pretty darn sure there's nothing wrong with the monitor/cable. (But what do I know?) I'll try using the monitor on my brothers computer, and see if it gives him any trouble.

    Plus, I tried to turn it on yesterday, and I suddenly started working again. Everything was fine. I was updating my Google+ and then it Blue screened. So I restarted it, and it wouldn't send signals to the monitor again. But as what happened before, it started working after a couple hours. So this time I ran the computer in safe-mode, and did a virus scan. (Just in case...) I left it overnight, and have yet to check it again. Thanks for all your help, guys, I'll keep you informed!

  • 542

    0

    Posted July 5th, 2013 19:00

    So, turns out it's not a problem with the hardware (like I thought) or the monitor. My brother was working with it (the computer) and he found out that a program I had downloaded (to make a PS3 controller work as a gamepad) was bugged or something, causing some of the drivers to crash. So apparently that was the problem, because we uninstalled the program, and everything has been working fine. Lets hope it stays that way. Thanks for your help guys!!

  • mav711

    245 Posts

    542

    0

    Posted July 7th, 2013 15:00

    What the name of that problem app to be wary of in case someone else runs across this situation?

  • NataliaatAW

    2 Intern

    •

    835 Posts

    542

    0

    Posted July 8th, 2013 13:00

    So, turns out it's not a problem with the hardware (like I thought) or the monitor. My brother was working with it (the computer) and he found out that a program I had downloaded (to make a PS3 controller work as a gamepad) was bugged or something, causing some of the drivers to crash. So apparently that was the problem, because we uninstalled the program, and everything has been working fine. Lets hope it stays that way. Thanks for your help guys!!

     
     

    Great to hear you got it sorted out :)

  • 542

    0

    Posted July 8th, 2013 21:00

    MotionJoy. :)