kaevans21

updated

5 years ago

K

kaevans21

4 Posts

1

3354

December 9th, 2021 13:00

Latitude 7320 Fails Updating to BIOS v1.12.2

None of our 7320s (whether brand new out of the box or currently deployed) are upgrading to BIOS version 1.12.2 (Release ID: 0FGKW). Dell Command | Update will run, then say the install failed and require a restart. Restart is standard; no BIOS install happens.

Is anyone else experiencing this issue? We aren't seeing it in any of the other Dell models we have, of which there are many.

  • kaevans21

    4 Posts

    2249

    1

    Posted December 14th, 2021 09:00

    Good news! 1.13.0 successfully ran from DCU.

    Weirdness I encountered when updating my own device (what better device to break than your own, right? lol):

    Seemed to go into hibernate upon completion of update

    Had to open/close/open my laptop to get it to turn on again

    Light on power button stayed on; wouldn't "hard shut down"

     

    Otherwise, all seems good. Hasn't done much for the audio weirdness (found rebooting while whichever device you want to use is plugged in helps), but at least the BIOS is up-to-date!

  • DELL-Cares

    Moderator

    •

    27844 Posts

    •

    748 Points

    1787

    0

    Posted December 10th, 2021 07:00

    We tried reaching you on a private message asking for the Service Tag number to ascertain the warranty but did not receive a response. Please feel free to reply to the private message whenever you are available.


    #IWork4Dell

    For all non-technical issues that require your private data, we must communicate via a private Direct Message
    Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice

  • kaevans21

    4 Posts

    1765

    0

    Posted December 11th, 2021 15:00

    All of these devices are under warranty. I've over 100 devices of this model alone in my environment. I'm not providing all of the details to you.

    I thought this was a community forum. I was looking to see if anyone in the community was having this issue.

  • mythnubb

    5 Posts

    1742

    1

    Posted December 13th, 2021 09:00

    We are seeing the same thing in our agency. We have around 2,000 Latitude 7320's and Dell Command update is failing to install the BIOS update with very little error information.

    dcu-cli.exe only says failed to install. I can't seem to find any extra log information.

    Here is the output from dcu-cli.exe.

    [2021-12-13 11:05:53] : The computer manufacturer is 'Dell' 
    [2021-12-13 11:05:53] : Checking for updates... 
    [2021-12-13 11:05:53] : Scanning system devices... 
    [2021-12-13 11:05:58] : Determining available updates... 
    [2021-12-13 11:06:13] : The scan result is VALID_RESULT 
    [2021-12-13 11:06:13] : Power adapter Status [Online] 
    [2021-12-13 11:06:13] : Warning: Because the BIOS update is selected and BitLocker is enabled on this system, BitLocker will be suspended temporarily at install time in order to apply the BIOS update. After the BIOS and other updates are applied, a system reboot is required to complete the BIOS update and re-enable BitLocker. 
    [2021-12-13 11:06:13] : 1 updates were selected. Download Size: 22.4 MB 
    [2021-12-13 11:06:13] : [1] 0FGKW, Dell Latitude 7320/7420/7520 System BIOS, 1.12.2 
    [2021-12-13 11:06:13] : Warning: The power adapter and any peripheral devices such as Dell type-C docks must not be disconnected from the system while installing BIOS and/or firmware updates. Disconnecting such devices during installation may lead to system instability or unusable peripheral devices. 
    [2021-12-13 11:06:13] : Scanning system devices... 
    [2021-12-13 11:06:14] : Downloading updates (1 of 1), 0 bytes of 22.4 MB transferred (0.00%)...  
    [2021-12-13 11:06:15] : Downloading updates (1 of 1), 1.5 MB of 22.4 MB transferred (6.69%)...  
    [2021-12-13 11:06:16] : Downloading updates (1 of 1), 4.0 MB of 22.4 MB transferred (17.84%)...  
    [2021-12-13 11:06:17] : Downloading updates (1 of 1), 7.0 MB of 22.4 MB transferred (31.21%)...  
    [2021-12-13 11:06:18] : Downloading updates (1 of 1), 10.5 MB of 22.4 MB transferred (46.82%)...  
    [2021-12-13 11:06:19] : Downloading updates (1 of 1), 13.7 MB of 22.4 MB transferred (61.31%)...  
    [2021-12-13 11:06:20] : Downloading updates (1 of 1), 16.7 MB of 22.4 MB transferred (74.69%)...  
    [2021-12-13 11:06:21] : Downloading updates (1 of 1), 19.8 MB of 22.4 MB transferred (88.07%)...  
    [2021-12-13 11:06:22] : Downloaded updates (1 of 1)., 22.4 MB of 22.4 MB transferred (100.00%)...  
    [2021-12-13 11:06:23] : Downloaded updates (0 of 0)., 22.4 MB of 22.4 MB transferred (100.00%)...  
    [2021-12-13 11:06:23] : Finished installing the updates. 
    [2021-12-13 11:06:23] : 1 update(s) failed to install. 
    [2021-12-13 11:06:23] : [1] 0FGKW, Dell Latitude 7320/7420/7520 System BIOS, 1.12.2 
    [2021-12-13 11:06:23] : Execution completed. 
    [2021-12-13 11:06:23] : The program exited with return code: 1 
    [2021-12-13 11:06:23] : State monitoring instance total elapsed time = 00:00:30.6704814, Execution time = 49mS, Overhead = 0.160435368973374% 
    [2021-12-13 11:06:23] : State monitoring disposed for application domain dcu-cli.exe 

     

  • dellfella

    1 Rookie

    •

    12 Posts

    1736

    1

    Posted December 13th, 2021 10:00

    Having the same problem when I just tried to update.

  • mythnubb

    5 Posts

    1730

    1

    Posted December 13th, 2021 11:00

    Some more info..

    If I manually download the BIOS update and run it, nothing happens.

    I noticed it does create files in %LOCALAPPDATA%\Temp\66082c6e-81f5-4df1-8286-f56200b49d4e\UI\   (you have to be quick because it deletes this directory when it finishes running)

    I can run the DellFlashUi.exe in there to bring up the flashing UI but it doesn't load the firmware. I assume it's passed from the initial installer.

    I still haven't found any logs for the process.

  • kaevans21

    4 Posts

    1728

    0

    Posted December 13th, 2021 12:00

    Interesting. We've not had an opportunity to test manual install yet; was curious of it would work.

  • mythnubb

    5 Posts

    1828

    0

    Posted December 13th, 2021 13:00

    I'm sure that works. Even using the BIOS update feature from the F12 menu allows me to manually flash said BIOS.

    However, like you mentioned, in our environment that just won't work. The 7320's have been a problematic model for us. Random power issues, hardware issues, audio issues etc... 

    We currently have a step in MDT to download and install the latest BIOS at the end of our image but because of this, it fails to get the latest version.

  • U2CAMEB4ME

    6 Operator

    •

    6245 Posts

    1830

    0

    Posted December 13th, 2021 13:00

    Welcome to the Dell Community @kaevans21 @mythnubb @dellfella 

    Just as a test.

    Create a bootable USB drive using “Rufus”

    https://rufus.ie/

    Under “Boot Selection” choose “Free DOS”

    Copy the BIOS update to the bootable USB drive you just created..

    Insert USB drive, power-on and start tapping the “ F12 “ key.

    Boot from USB and run the BIOS update.

    I do individual updates every day using this methode.

    For your environment I realize this would be impractical, but it may help find a resolution.

    Best regards and bonne chance,

    U2

  • dellfella

    1 Rookie

    •

    12 Posts

    1810

    0

    Posted December 13th, 2021 16:00

    FYI, I used SupportAssist for Home PCs Version [3.10.4.18] to upgrade. Does everything, downloads etc then just stops and displays Failed.

    Dell1.PNGdell2.PNG