UNSOLVED

jddfw

updated

5 years ago

J

jddfw

2 Intern

•

87 Posts

1

10825

March 8th, 2021 07:00

Issue with AHCI Controller on new Latitude 7420

We received our first Lat 7420 and had to flip it to AHCI (from Raid) in order to apply our image.  No biggie, as we've had to do this with some past Latitudes.  However, after the image was successfully applied, we were left with an error for the Standard SATA AHCI Controller...

A Microsoft driver is in place, so what we're seeing is "Device not started (storahci)," with a "0xC00000C2."  The 'general' error being "The device cannot start.  (Code 10).  An I/O adapter hardware error has occurred."

 

 

  • jddfw

    2 Intern

    •

    87 Posts

    7643

    0

    Posted March 8th, 2021 07:00

    Needless to say, applying the latest BIOS, Chipset, and nearly all the available drivers haven't addressed this.  So, short of my researching the error...I'm wondering if it's more because we set it to AHCI.

  • _Diablos_

    2 Intern

    •

    22 Posts

    7619

    0

    Posted March 9th, 2021 01:00

    We have the issue with Raid setting not working in SCCM as well, even with the latest IRST drivers.

    So we flip it to AHCI. Imaging the device using AHCI has been working fine for us on this model (No errors during or after imaging), so i suspect you are missing the correct drivers. Did you pick up the latest F6 drivers from Dell, as well as import the SCCM drivers package for this model?

  • Jerry Lu

    1 Message

    7591

    0

    Posted March 10th, 2021 00:00

    I got the same issue with 7320

  • jddfw

    2 Intern

    •

    87 Posts

    7520

    0

    Posted March 11th, 2021 12:00

    I tried the IRST drivers for the 7420, post-imaging, to no avail.  IRST F6 drivers...thanks for the tip!

    As a point of reference, I disabled the AHCI controller and the system appears to continue to work (without complaint).

  • Bigbluee

    9 Posts

    7459

    0

    Posted March 12th, 2021 05:00

    Did You load most new WinPE drivers to WIM ? If not, do this as new serwies requires drivers from newest WinPE cab.

  • _Diablos_

    2 Intern

    •

    22 Posts

    7425

    1

    Posted March 15th, 2021 02:00

    Also, we have had a couple of instances of the laptop reversing to Raid, even though no Dell updates have been installed. That, of course results in BSOD for the users until it is set back to AHCI in Bios. Major annoyance.

  • 7359

    0

    Posted March 16th, 2021 02:00

    Hi all, 

    we´re having also issues with the "standard SATA-AHCI Controller".
    We have deployed the latest 20H2 driver package through our system, but the unknown devices still shows up in the device manager.

    Has anyone a solution?

    many thanks in advace
    axel

  • jddfw

    2 Intern

    •

    87 Posts

    5469

    0

    Posted March 16th, 2021 06:00

    Just to clarify, I do show a driver on this device, but the "device cannot start."  Now, maybe it's Microsoft's storahci.sys that's actually triggering the "Code 10" error, but a driver was automatically assigned...

    Axel, do you mean that yours doesn't even have a driver on it?

  • ccsscss

    9 Posts

    4737

    0

    Posted March 19th, 2021 10:00

    I am also having this same issue, I've updated the WinPE w/ the 2/22 x64 10.0 drivers, tried ACHI & RAID to no avail.  Using 1.4.1

  • SuggsB

    1 Rookie

    •

    18 Posts

    2780

    0

    Posted April 14th, 2021 11:00

    We had 1 out of 6 devices that have this problem. We reverted back to Dell image but with AHCI set it BIOS and issue remains. Motherboard being replaced in a few days.