UNSOLVED

DSO_Admin

updated

3 years ago

D

DSO_Admin

1 Message

0

3349

August 28th, 2020 03:00

Dell latitude 5400 / WD19 / Dell P2418HZm

Hello,

I use a Latitude 5400 with a WD19 dock and the screen Dell P2418HZm.

That has a camera and audio build in, but I cannot connect the USB of the monitor to the dock, because the camera will connect and disconnect constantly. Producing the USB device plugged-in sounds..

When connecting the USB directly to the laptop, no issues. But that defeats the purpose of a dock..

We try updated all driver and firmware from dell support, we try to use Windows 10 1809 and 1909, same issue.

We  have arround 100 laptop 5400 with this wd19 docks

  • jphughan

    11 Legend

    •

    13985 Posts

    •

    79931 Points

    2899

    0

    Posted August 28th, 2020 08:00

    @DSO_Admin  Just fyi, someone else reported this with Latitude 7400s and multiple models of the WD19 dock family here.

  • jphughan

    11 Legend

    •

    13985 Posts

    •

    79931 Points

    2865

    0

    Posted August 31st, 2020 12:00

    @DSO_Admin  I sent this to an internal Dell contact who's been really helpful escalating issues internally in cases like this where multiple reports of the same issue are coming in and user error doesn't seem to be a plausible explanation.  He replied that he found an internal document about this issue indicating that the fix is to get P2418HZ displays that are revision A09 or higher, where some internal wiring to the webcam was changed.  An alternative fix listed is to connect the USB cable to the system through a female USB-A to male USB-C adapter.  Reading between the line here, my guess is that something about the pre-A09 versions of the P2418HZ caused its webcam to draw more power than at least some USB-A ports can provide, apparently including the WD19's ports but NOT the ports built into some laptops.  The USB-A to USB-C adapter may be a suitable workaround because USB-C ports tend to provide more power as standard.  I realize that this isn't an ideal answer for a variet of reasons -- the potential hassle of exchanging the display, dealing with a workaround that would consume a USB-C port on the WD19 dock, which may not even be an option if that port is being used for a display, and the fact that a lot of what I just said is my guess rather than an official answer from Dell.  But I'm just passing along what I've received here.

  • bsallison

    2 Posts

    2777

    0

    Posted September 23rd, 2020 14:00

    How does one tell what rev the P2418Hzm is at?  Is that on the lael on the back bottom or is it in an on-screen menu somewhere?

  • bonkers76

    6 Posts

    2773

    0

    Posted September 23rd, 2020 14:00

    Not directly related, but what we found after some initial testing, hope it helps:

    Hi Everyone,

    6 x Latitude 5501 Deployed, all with the exact same issues. BIOS, Docks, Drivers all updated since we deployed, but the issue persisted.

    Been fighting with Dell support for a few weeks, the answer was to reload Dell OEM image and test as we loaded our own image. Which we did and it worked, but I wasn't convinced it would remain working as we were not able to continue testing. But it bugged me that this was Windows 10 2004 Build and we were still on 1809. Fortunately our End Point Team started testing the 2004 update as 1809 is nearing end of support. I took a chance on one of the 5501's and once the update installed the issues were immediately solved. This 5501 was on all the latest firmware's and drivers. We did the same update today on another of the afflicted 5501's which we purposefully kept on the shipped BIOS and firmware's and the issues are now also solved. We will continue to update the remaining 5501's we have. We have however been seeing WD18 dock issues, both versions of it and started testing, however, these issues seems to have manifested since the last few Windows updates, not sure if something in those updates is adversely affecting Docks on Windows 1809 build.

    Hope this helps someone, I will try to update again if we find more info as we continue, but we still rue the day Dell started with the USB-C Docks, has been a rocky ride and many paper weights in the cupboards thus far...

  • tsauer

    1 Message

    2332

    0

    Posted February 12th, 2021 00:00

    Hi,
    In the unsuccessful search for a firmware update for the monitor, I downloaded and installed the available driver package.

    https://dl.dell.com/FOLDER04559726M/1/DELL_P2418HZM-MONITOR_A00-00_IR-CAMERA-DRVR_0073F.exe

    Since then no dropouts and no "ding dong". Windows Hello face recognition now also works.

    In the device manager, the camera is no longer listed under cameras but under image processing devices.

  • 1010

    0

    Posted May 30th, 2022 13:00

    Monitor Model# Dell 24 ICM Monitor - P2418HZm
    Docking Station Model# Dell Thunderbolt Dock- WD19TB

    Solution / Work around#
    It can be resolved by using the docking station port "9. Thunderbolt 3" as labeled in the instruction manual and with the purchase of an adapter from amazon i.e. "Amazon Basics USB-C3.1 Gen1 to USB-A Adapter with Data Transfer up to 5Gbps (USB-IF Certified)" and then connect the 2418HZM USB hub cable from monitor to the adapter. Additionally download and install all the latest drivers for the dock from Dell portal.

  • MrPeg

    5 Posts

    257

    0

    Posted May 31st, 2023 07:00

    Anyone tried this, does it work?
    So if i understand this...
    P2418HZm  >  USB hub cable  >  USB-A female to USB-C 3.1 male (Data Transfer)  >  WD19TB

  • Anonymous

    12 Elder

    •

    274137 Posts

    17

    0

    Posted June 9th, 2023 03:00

    I can suggest a few general troubleshooting steps that may help:

    1. Confirm compatibility: Ensure that the WD19 dock and the Dell P2418HZm monitor are compatible with each other and with your Dell Latitude 5400 laptop. Check the documentation, specifications, and support resources provided by Dell.

    2. Check cable connections: Make sure all cables connecting the dock, monitor, and laptop are securely plugged in and undamaged. Try using different USB cables or ports on the dock.

    3. Update firmware: Visit Dell's support website and ensure that you have the latest firmware installed for both the WD19 dock and the Dell P2418HZm monitor.

    4. Reset dock: Try performing a power cycle or reset on the WD19 dock. Disconnect its power adapter, wait for a few minutes, and then reconnect it.