Harry321

updated

6 years ago

H

Harry321

8 Posts

0

2390

October 3rd, 2020 02:00

Inspiron 14z 5423 HDD SMART TEST Failure

Hi Friends,

I have a Dell Laptop, I Formatted it due-to very Slowness and Tried to Load Windows 8.1 x64 with USB Boot ( also tried DVD Boot), but it frequently kicking-me out, instead of starting Boot Process.

Later I Performed Hardware TEST got Error like-

" SMART Predective Failure HDD Drive 0 Test Results: FAIL " ERROR Code 2000-0151   Validation 105619

Msg: Hard Drive 0 - S/N TE95113RHH7NPP, Incorrect status = 3E

#Technical Support will need to Diagnose the Problem.

Anyone Could please help with this, is my HDD Disk Corrupted? PFAHDDTEST1.jpgHDDTEST_2.jpg

 

  • ejn63

    12 Elder

    •

    31859 Posts

    •

    156322 Points

    1697

    3

    Posted October 3rd, 2020 04:00

    Yes, the hard drive has failed.  It will need to be replaced;  an SSD would be a better replacement than another hard drive, since it will boost the system performance appreciably.

     

  • ejn63

    12 Elder

    •

    31859 Posts

    •

    156322 Points

    1648

    2

    Posted October 12th, 2020 04:00

    Yes, though note that WIndows 8 is no longer supported with security updates (8.1 is but not for much longer).

    You'd likely be best off installing a clean copy of Windows 10 on the system.

     

  • Harry321

    8 Posts

    1640

    0

    Posted October 12th, 2020 07:00

    awesome!! thanks @ejn63 

  • Harry321

    8 Posts

    1597

    0

    Posted October 26th, 2020 05:00

    @ejn63 

    my old HDD was completely crashed and Failure issue to bootup, but i got windows-8 x64 install CD with Laptop, that i copied into USB stick and tried to usb boot to install OS on this SSD, also tried to Boot installation CD.

    I did below changes in BIOS before Boot-

    1. My BIOS is locating the SSD as Internal HDD.

    2. In BIOS changed SATA mode to- AHCI, changed boot sequences & tried different ways to boot- usb,dvd etc.

    No Luck!!

    "For Atheros PCIE Ethernet Controller v2.1.1.1
    Check cable connection! PXE-M0F: Exiting Intel PXE ROM Reboot and Select proper Boot device or Insert Bootable Media
    in selected boot device and press a key_"

  • ejn63

    12 Elder

    •

    31859 Posts

    •

    156322 Points

    1794

    1

    Posted November 7th, 2020 09:00

    You likely need to manually update to 8.1 -- Windows 8 has been end of support for about four years, so it's unlikely Windows Update will work for it.

    That said, Windows 10 is a much better idea, as 8.1 support has just over two years left before it goes end of support as well.

     

  • Harry321

    8 Posts

    1651

    0

    Posted October 12th, 2020 04:00

    My Laptop come with windows 8 x64 genuine, if i replace My HDD with 2.5 inch SATA SSD, am i able to use my genuine windows( with the installation CD that came with Laptop) and get the windows updates.

  • Harry321

    8 Posts

    1609

    0

    Posted October 25th, 2020 08:00

    Friends, I have upgraded my old SATA 2.5" Inch HDD with WD SATA 2.5" inch 500GB SSD. it perfectly fit in Laptop, but Getting Error in Booting SSD like- "For Atheros PCIE Ethernet Controller v2.1.1.1 Check cable connection! PXE-M0F: Exiting Intel PXE ROM Reboot and Select proper Boot device or Insert Bootable Media in selected boot device and press a key_" 1. Tried many fixes for SSD connection, changed boot sequences and tried many ways to boot- usb,dvd etc doesn't workout. 2. DELL Daignostic SMART TEST passed and no Issue Obsereved in SSD installed. please suggest, First Ever tried this Upgrade
  • ejn63

    12 Elder

    •

    31859 Posts

    •

    156322 Points

    1607

    0

    Posted October 25th, 2020 09:00

    Have you installed Windows onto the new drive?  If not, it's blank and therefore not bootable.

    https://www.dell.com/support/article/en-us/sln297920/reset-or-reinstall-windows-10-on-your-dell-computer?lang=en

  • ejn63

    12 Elder

    •

    31859 Posts

    •

    156322 Points

    1594

    0

    Posted October 26th, 2020 05:00

    You cannot simply copy a Windows DVD to a flash drive - the result will not be bootable.  If your DVD drive doesn't boot, you can use something like Rufus to prepare a bootable flash drive. 

    https://rufus.ie/

    That said, you'd be better off installing Windows 10 from a Microsoft boot flash drive:

    https://www.microsoft.com/en-us/software-download/windows10

  • Harry321

    8 Posts

    1564

    0

    Posted November 7th, 2020 08:00

    @ejn63 Thanks able to setup SSD in my Dell Laptop, i made usb boot from my windows 8 x64 bit CD came with Laptop, shows windows Activated Status but not able to fetch updates, since previously i have upgraded the same windows to 8.1 x64 now it gives like-

    " Error Found Code 80072EFE windows update ran into problem"

    win_updateError.PNG