I am thinking about purchasing an Inspiron 3910 and upgrade it for gaming on my own. Most parts such as memory and video card are standard. However, I have a question about the PSU. I know that Dell's OEM PSUs are "slim" or Mini ITX (blue box) and they are not powerful enough. I want to replace with standard ATX PSUs (over 500w). Is this doable? I do see that there is space (red box). Thank you.
Dimensions of an ATX power supply are 150 mm width, 86 mm height, and typically 140 mm depth, although the depth can vary from brand to brand.
Dell has not published the dimensions of its proprietary psu (8 pin) for 3910. Dell uses psu of same 8 pin for optiplex 3000/5000/7000. It also uses same psu in XPS 8950, for which there is option to upgrade to 750/1000w. the higher power oem psu are of same height as the 180w psu, but are wider.
vendor published data of 750w (10 pin) psu is 185*150*62mm. It is 150 mm wide and 62 mm tall (and 185 mm deep).
therefore, it is a low profile psu, only 62 mm tall. A standard 86 mm tall psu would not fit in the space between chassis floor and motherboard.
The real problem of using ATX psu however is that we still do not have a verified pinout of the Dell 8 pin (a subset of 10 pin for Intel 12th gen oem mobo). so a standard psu 24 pin has no adapter for the Dell motherboard.
for now your option is to use the top 300w oem psu for 3910 which is still good for many gaming video cards. Those 460w/500w psu for 8950/7000 may not be compatible with 3910 because they have two 4 pin.
In theory yes but in practice cumbersome and not elegant. You would need a separate logic circuit to turn on the auxiliary gpu. I suggest wait on retail availability of Dell 460w psu (6+4 pin) for Inspiron 3020. Alternatively you can test the 500w psu for Optiplex 7000 which has 8+4+4 pin. No user has validated this off the label use and there is 50/50 chance 3910 motherboard may not post because one of the two 4 pin of 500w psu is not plugged in anywhere, but recent user reported 500w psu of 6+4+4 pin works perfectly on Dell motherboard having 6+4 pin, so you never know until you test one yourself. If you are US based and want to test such psu, make sure seller accept return in case it does not work out.
Do you think I can add another normal ATX PSU to power the graphics or other components? And leave the original Dell PSU to power the CPU and motherboard only?
second psu needs a signal to turn on. typically a motherboard power switch sends a PS_ON signal to the psu. again it is not a good idea to connect two psu to one pc. you probably should not do it. I would investigate whether the Dell 460w or 500w psu w 8+4+4 pin (for XPS 8950/Optiplex 7000) could work with 3910 that has 8+4 pin. If seller accepts return in case such psu does not work out, it may be worth a test.
redxps630
11 Legend
•
16431 Posts
•
83176 Points
4067
0
Posted September 24th, 2022 14:00
Dimensions of an ATX power supply are 150 mm width, 86 mm height, and typically 140 mm depth, although the depth can vary from brand to brand.
Dell has not published the dimensions of its proprietary psu (8 pin) for 3910. Dell uses psu of same 8 pin for optiplex 3000/5000/7000. It also uses same psu in XPS 8950, for which there is option to upgrade to 750/1000w. the higher power oem psu are of same height as the 180w psu, but are wider.
vendor published data of 750w (10 pin) psu is 185*150*62mm. It is 150 mm wide and 62 mm tall (and 185 mm deep).
therefore, it is a low profile psu, only 62 mm tall. A standard 86 mm tall psu would not fit in the space between chassis floor and motherboard.
The real problem of using ATX psu however is that we still do not have a verified pinout of the Dell 8 pin (a subset of 10 pin for Intel 12th gen oem mobo). so a standard psu 24 pin has no adapter for the Dell motherboard.
for now your option is to use the top 300w oem psu for 3910 which is still good for many gaming video cards. Those 460w/500w psu for 8950/7000 may not be compatible with 3910 because they have two 4 pin.