Inspiron 24-5477, NVIDIA GTX1050, extremely hot (93-94°)
Hi, I have a brand-new Inspiron 24-5477 AIO and I've noticed that when playing games like Fortnite, the built-in NVIDIA GeForce GTX1050 graphics card is getting extremely hot. It is running constantly around 93-94 degrees(!) Celsius which doesn't seem normal at all to me. And the fan is constantly spinning at maximum rotational speed. Even when I put the game at the lowest possible settings, it's not running any cooler. The GPU usage measured by Windows is also always going to around 95-100%. FYI, I'm measuring with the latest version of HWiNFO64. It also shows the GPU is constantly hitting it's thermal performance limit which would cause the GPU to wear out very quickly I'm afraid. I'm on all the latest Dell/Windows/NVIDIA updates/patches with all the firmware updates available for my model done. Also Dell SupportAssist is detecting everything is updated accordingly. The room temperature where the PC is located is always around 21 degrees Celsius and no dust build-up anywhere. Any suggestions on what could be the cause and how I could avoid it? Can anyone with the same model check the GPU temperatures and fan speed when playing Fortnite or any other game? Thanks!
Removing back cover and cutting holes in the back to put fans in is the method to get the heat under control. 95 down to 75 passive air cooling. Note the fans are mounted outside with holes cut and drilled into the cover with 12v power tapped from inside the case.
Unfortunately, AIO's tend to heat up because there's very little airspace to dissipate all the heat. They're essentially a laptop with a separate keyboard.
If this PC is under warranty, you might want to contact Dell Tech Support to see if they have any recommendations...
The video card in this model is soldered to the motherboard. That's not the same as an add-in video card that plugs into a PCI-e slot, so you you can't compare.
The guide for this model says the operating range is 41°F to 95°F. So you're within that range, but I agree it's right under the upper limit. I doubt anything is going to melt...
Reboot and immediatelypress F12. Assuming you have a Diagnostics option on that menu, run the fan tests. It's possible the fan isn't running at the right speed or not adjusting its speed based on the heat load.
And since you're under warranty, you should contact Dell Tech Support ASAP because it's also possible there's a problem with the heat sink and/or the CPU thermal paste.
You might get the feedback you seek on forums dedicated to your games...
it's indeed not the same as an add-in card so that's why I'm looking for someone with the exact same AIO model to see what temperatures it runs on and if there is a big difference with mine.
Concerning the GPU temperature, I'm not reaching 94°F but 94°C, so that is around 201°F! If I check the NVIDIA site it says:
So theoretically, it can sustain these high temperatures but it's very near the build limits of the chip so not good at all to run for a prolonged period of time.
I already ran Diagnostics multiple times but it can not detect any issues. I guess the fan speed is fine because if I play a game, at that temperature the fan is blowing very hard (around 4700 rpm I thing) and sounds a bit like a jet fighter. Without the GTX1050 in action, fan speed is around 1780 rpm.
I'm planning to contact Dell in the near future concerning this problem, but would like to know a reference point so I know at what temperature this system should run if everything runs normally.
Hi, isn't there anybody with this Inspiron 24-5477 AIO who can perform the same tests as I did on mine? I'm really interested if another identical system running a game like Fortnite on maximum settings and checking the GPU temperatures (with the free HWiNFO64 for example) is reaching similar temperatures? Please let me know if you need more information from me to perform these tests. Thanks in advance! BartD
I have AIO 7777 27" 4K and when gaming I'm hitting same temperatures like yours in just minute on full load and fan maxed out. (my room temperature is around 25)
Also worth to mention that my motherboard was changed recently under the warranty for some other reasons and I noticed that gpu came with solid thermopaste on while CPU thermo paste was applied by technition.
I'm worried that I'm going to cook my new PC as well. Were you able to solve the temp issue?
Maybe additional layer of thermopaste would help...
thanks for your feedback, but sadly enough my problems have not been resolved in the meantime. I did receive multiple new BIOS updates, but none of them changed anything related to these high temperatures and also I'm afraid my PC will degenerate quite rapidly will running at temperatures above 90 degrees Celsius.
You said you recently received a new motherboard. Did you have the same, high temperatures on the previous one as you have right now or did the problem appear only after the repair for you?
Redoing the thermal paste with a high quality one might shave off a couple of degrees, but in my opinion it will not make such a big change that the system would go to the max 75-80 temperature range it should be at. It looks more like a design issue to me.
Mine is still as it left the factory and I'm reluctant sending it back for repairs if it's a general design problem. But I find it strange there are only so few reports of it that can be found on the internet, so I'm really interested if there are people with the same model that do have normal temperatures during high load.
yes, I did run the full diagnostics from the F12 menu, including fan diagnostics and no errors were found. Everything behaves as expected. When I run the system under heavy load, I do hear the fan going into very high rpm almost instantaneously. If I stop that load, after a few seconds it's returning back to the normal speed.
Also strange is the fan never completely stops, even if I'm doing nothing at all. I did have a Asus Zen AiO ZN242GDK with the same nVidia GPU and a very similar i7-8750H CPU and in that system, the fan was completely off and only when running heavier loads, the fan started to spin, and never at the same speeds the Dell is running at.
It's indeed strange the service manual has no instructions on applying thermal paste after a replacement, but as said, I don't think redoing the thermal paste will make the temperature go down by 15-20 degrees Celsius, which it should do to have a normal running temperature. Once going above 80-85 degrees Celsius, the component degradation will be much faster. I fear it's a design issue so only underclocking through a BIOS update might bring down these temperatures, but at the cost of performance...
Did either of you try running the fan diagnostics from the F12 menu?
And keep in mind this is essentially a laptop PC and doesn't have a "standard" heat sink like you'd find in a desktop. So it may not be very efficient.
And believe/not, there's no mention of thermal paste anywhere in the Service Manual after replacing either the heat sink or the CPU... Hmmm...
speedstep
11 Legend
•
46969 Posts
3348
0
Posted September 1st, 2021 17:00
@BartD007
@XPS_Man
https://www.dell.com/support/home/en-us/product-support/product/inspiron-24-5477-aio/docs
inspiron-24-5477-aio_service-manual.pdf
Removing back cover and cutting holes in the back to put fans in is the method to get the heat under control. 95 down to 75 passive air cooling. Note the fans are mounted outside with holes cut and drilled into the cover with 12v power tapped from inside the case.
https://www.youtube.com/watch?v=CBtaowuKAhk