Help! Inspiron light on but no display and no signs of life
Inspiron desk tower has the light on, and the disc drive will open, but the monitors say no display, and there are no signs of life coming from the tower. I also am unable to turn it off, so the button is just on and glowing. I tried draining residual power and plugging back in with no luck. It currently has two HP monitors attached to it, with accompanying splitter cables, and is plugged into a power surge outlet (I tried with other outlets as well). Any help appreciated because calling Dell support has been a real pain (they sent me a laptop box in the mail and said it can take weeks to return...).
Same thing happened to mine (inspiron tower 3650). I ruled out any defects in the components, then I called out of warranty support and they said it is a known issue and filed a claim, and they told me they would have an answer in 2-3 days as they were still researching the issue. I believe it has to do with the "Spectre/Meltdown" Bios update.
savvy2
4 Apprentice
•
2547 Posts
539
0
Posted June 25th, 2019 09:00
laptop < huh? NO PC stated at all just vague series name. dell started this is 2007 tower. inspiron..
with 22 different versions all those years forward. upto 5675 ! gamer .
you posted to inspiron desktops why say that? laptop deal., can you clarify that/?
the tower, power can fail. (2 ways, basically the PSU is bad or the PSU is overloaded) the tests are simple do you fear opening the case?
I guess the CPU fan never stops turning?, that it or CPU fan and HS, are packed solid in lint.
there are signs of power , for sure, but sure the HDD does not boot nor does windows is dead.
but forget all that what PC do you own.
the power lamp solid is a sign of power, for sure, so it is not no signs of power.
next is DVD drive reject button if present.
CPU and PSU fans spinning are a sign of power, as is sounds. (any)
and the 2 monitors if you connect up just one to what JACK (idk which video port you use) but if one monitor shows (just one connected)
no Signal that means just that the video cable is dead. as will be the jack unstated by you on the tower.
so holding the button power in for 10 full seconds does not silence the fan. right>? (ac cord to wall power)
These are not 2009 or older monitors right?
as always If PC is in warranty , do not read my posts. I post on solving problems DIRECT, never about warranty.