Raju_auh

updated

16 years ago

R

Raju_auh

60 Posts

0

2432

February 27th, 2011 10:00

SPS showing faulted even after changing

Hello Experts,

I am getting SPS faulted alarm in Navisphere even after changing (fully charged) with a new one.Rebooted both the SP's.still getting the same alarm and no

alarms in the SPS(no amber light).Any idea what could be the problem?

Thanks....

  • RRR

    6 Operator

    •

    5739 Posts

    1255

    0

    Posted March 2nd, 2011 02:00

    Since you already rebooted the SPs, I'm totally out of options. If connectivity is ok and the management servers have been restarted (SP rebooted), I don't think there's much more you can try.

    Are you absolutely sure you plugged into the right connector on the correct SP ? So SPS A conencted to SPA and SPS B connected to SP B ?

  • RRR

    6 Operator

    •

    5739 Posts

    1255

    1

    Posted February 28th, 2011 07:00

    Try reconnecting the serial cable used for communication between SP and SPS.

  • Raju_auh

    60 Posts

    1255

    0

    Posted March 1st, 2011 10:00

    We reconnected the cable,changed the cable with another one and even changed the connector from SPA to SPB but still facing the same problem.

  • kelleg

    6 Operator

    •

    4537 Posts

    1255

    1

    Posted March 2nd, 2011 10:00

    recommend that you open a case with EMC.

    glen

  • RRR

    6 Operator

    •

    5739 Posts

    1255

    0

    Posted March 2nd, 2011 14:00

    absolutely

  • cergio

    13 Posts

    1255

    0

    Posted November 28th, 2011 06:00

    I have the same issue with a CX4-120. Could you solve the issue?

  • MartinDuble

    1 Rookie

    •

    51 Posts

    1255

    0

    Posted December 21st, 2011 10:00

    Same thing happened to us, we had the same problem. We replaced it twice, finally I rebooted the SP and fault was cleared.