I just moved our 2 "beginner" servers to a switched fabric from basically a DAS on a CX3-20 to using 2 Brocade switches and am seeing something odd in Navisphere. When I look at the connectivity status of one of my hosts I am seeing 2 connected storage groups (right clicking on the host and selecting connectivity status). One of them is called ~management and shows 2 connections logged in YES registered YES. The other is the actual host name with 2 connections showing, logged in YES, registered YES and 2 more showing logged in NO registered YES.
There are 2 LUNS attached to the host. I did have to click "reconnect" to regain communication when I was done but that was because I had to pretty much reverse the initial connections.
Everything is working fine and I have tested fault tolerance by removing each HBA fiber connection. How can I get rid of the "ghost" connections?
if you can bring the server down once, i would suggest you try removing the host from storage group and add it back in. if that doesnt work, shut the host down, de-register all the ghost as well as good entries (related to that host) in connectivity status and bring the host up. having navisphere agent installed on the host would be great.
Could you try, using the option "Reconnect". This option is available, once u right clict the host host under SG and then choose the option Connectivity status.
Highlight the entries shown as ~management and then click Reconnect. This should probably resolve the entry of ~management and also the ghost entries.
I won't suggest you the option of using "Deregister", bcos, this may affect one of the hba's connection to the SP, which again you have to register it, by restarting the Navi host agent.
If Navisphere host AGent is there, then you restart the Navisphere host agent from the host end, this MAY help in clearing the ghost entries.
EKellerman
76 Posts
413
0
Posted February 8th, 2007 05:00
You may need to login to engineering mode to do this if the option is grayed out.