Is there a CLARiiON equivalent of Symmetrix Change Tracker?
I'm wondering if CLARiiON provides functionality similar to that of Symmetrix Change Tracker, i.e., a mechanism by which one can monitor volumes and identify blocks that have changed.
I've appended below an excerpt from the Symm Change Tracker doc, in case there are those who are not familiar with what it does but who, I hope, are familiar with CLARiiON's capabilities.
Any ideas?
Thanks in advance.
===============
The EMC® Solutions Enabler Change Tracker software is used to
measure changes to data on a Symmetrix volume or group of
volumes. The Change Tracker command (symchg) is used on FBA
devices to mark selected areas of Symmetrix disk storage so that
Symmetrix logical volumes occupying those areas can be monitored
for change.
Change Tracker uses DeltaMark bitmap technology (formerly called
the Symmetrix Differential Data Facility) to identify logical blocks
that have been changed on a Symmetrix FBA device. Before change
tracking can begin, a DeltaMark session must be created using the
symchg create command. The symchg mark command is then used to
perform a timestamp and mark the selected area of disk storage
occupied by a data object using a DeltaMark bitmap.
This allows a marked area to be examined at a later time to view
changes to the stored object. The tracked changes can also be saved to
a log file for later analysis. Change Tracker data is often used to
analyze and design TimeFinder and Symmetrix Remote Data Facility
(SRDF) configurations.
The Symmetrix system stores information about track changes
internally, and makes this information available to applications
through a DeltaMark bitmap vector or table. Each DeltaMark bitmap
contains a bit for every track on the monitored volume. When a write
to the volume alters a track of information, the bitmap is updated to
reflect that the track has been changed. (Subsequent changes to that
same track have no affect on the bitmap.)
Not that I'm aware of however you can obtain similar information by using snapview and creating a snapshot against the source LUN. If you look at the session statistics, that should provide you some indication as to the write activity against the source LUN which is basically what change tracker does for you....
Each COFW (ie write to the reserved LUN) is 64KB, so those writes could be thought of as 2 tracks being marked in symchg on a DMX-2 (or older) or 1 track on a DMX-3
No, not to my knowledge. If you have many systems, you could ask the client to run as OS based tool like perfmon (windows) as well as any backups that the client may have to review change info. It is best to use two tools then cross reference to be more accurate as each tools has its own caveats.
GlenH
141 Posts
551
0
Posted February 22nd, 2007 15:00
Not that I'm aware of however you can obtain similar information by using snapview and creating a snapshot against the source LUN. If you look at the session statistics, that should provide you some indication as to the write activity against the source LUN which is basically what change tracker does for you....
Each COFW (ie write to the reserved LUN) is 64KB, so those writes could be thought of as 2 tracks being marked in symchg on a DMX-2 (or older) or 1 track on a DMX-3
Hope that helps,
Glen.