UNSOLVED

JessieAquino

updated

15 years ago

0

9867

February 17th, 2012 05:00

Clarion CX480 Expanding LUN

I expanded a LUN on our CX480, but the host (Windows OS) can't see the new size. I used the the expand command from the drop down menu.

  • etaljic81

    1000 Posts

    803

    0

    Posted February 17th, 2012 05:00

    Is the LUN on a RAID Group? Did you create a metaLUN? If so, did you create a concatenated or striped metaLUN?

  • gangas3

    21 Posts

    803

    0

    Posted February 17th, 2012 05:00

    Hi,

    How much capcity was added to the source lun , did you reboot the host ?

  • 803

    0

    Posted February 17th, 2012 05:00

    It's part of a raid group in a pool. I did not create a metaLUN. We have a pool that have more than enough capacity. Thanks

  • 803

    0

    Posted February 17th, 2012 05:00

    We extended by 500GB. I expanded it from 1200 to 1700. We did not reboot the host. But should be able to re-scan, instead of rebooting a host.

    Thanks

  • etaljic81

    1000 Posts

    803

    0

    Posted February 17th, 2012 06:00

    Ok, so you can see the additional space in Disk Management. Now you need to run diskpart in order to extend the volume. Here are the steps:

    1. Log in to the server and open command prompt

    2. Type diskpart and press enter

    3. Type: list volume

    4. Type: select volume

    5. Type: extend

    The volume is now extended.

  • 802

    0

    Posted February 17th, 2012 06:00

    I can see from the Unisphere. But I can not see it from the Windows -> Storage -> Disk Management even after rescan disk command.

    Thanks

  • etaljic81

    1000 Posts

    803

    0

    Posted February 17th, 2012 06:00

    In Disk Management, do you see the additional capacity?

  • 803

    0

    Posted February 17th, 2012 06:00

    Yes. Even when I click the properties. It's definitely showing the new size. Here it's what I did:

    From the Unisphere Management:

    1. Selected the LUN

    2. Click on the expand from the drop down menu.

    3. Expanded from 1200 to 1700 and click OK.

    4. Check the property and It displayed the new size.

    On the host side:

    1. rescan disk from the Windows -> Storage -> Disk Management

    I think this are the proper steps.

    Thanks for jumping in. I am just filling in, because our Storage Admin is not available.

  • 611

    0

    Posted February 17th, 2012 08:00

    When we do a diskpart, we can't see the added space. We can't see the grayed out space from  Windows->Storage-Disk Management either. We will reboot our Windows server and see if that makes a difference.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    802

    0

    Posted February 17th, 2012 08:00

    did you follow the steps Ernes provided ? What do you in Disk Management,  if expansion has been completed, you will see your drive and an extra "gray" space. You use diskpart to extend NTFS file system to take advantage of that new capacity.