
UNSOLVED
A
ankushjain1
10 Posts
0
451
April 16th, 2012 10:00
Can we Powercycle a slot in DAE of CX700
We have a disk stuck in Faulty state after replacement on our CX700 array which is having the latest FLARE available for that hardware.
Can we power cycle a single slot without affecting other slots on that DAE and the array?
If yes – can this be done remotely?
Responses (1)
Solutions (0)

AnkitMehta
4 Apprentice
•
1365 Posts
118
0
Posted April 16th, 2012 11:00
You may try reseating the disk. However, if the disk has faulted after replacement, we need to check if the slot itself is faulty or not. Please, open a Service Request with SP Collects attached with EMC Technical helpdesk for further investigation.