I just buy Area51m, which have 2 power adapter and 2 power slot. I heard there is designated slots for each power adapter, small one, go to the small slot (not physically small but the slot that supposedbly have lower wattage input). Please clarify. Thnx before.
As the system manual says: Your computer ships with two power adapters, and it will operate normally with one power adapter connected. For maximum gaming performance, it is recommended to connect the two adapters. Only use adapters supplied with your device, or Dell-approved adapters to power your device.
One user having problems isn’t a solid data source, especially since I find it hard to believe that the user can be certain that their problems were caused by switching AC adapter slots. I think the most certainty you’ll get is from Dell’s official documentation that I’ve already linked. It doesn’t make sense that Dell would have assigned specific ports to specific AC adapters without clearly marking them that way. A design that didn’t make that requirement clear and damaged the system would just result in a lot of warranty replacements (and therefore cost) to Dell and a lot of frustrated users.
So that being said, there can be a power supply developed to power the laptop with one single power brick and one cord, I mean not for traveling but for easy home use. I don't see why that was not an option from the start since this laptop is more a desktop replacement then w laptop. Come on how many people does dell see carrying this beast on an airplane? It's. A single power supply should be an option.
When I travel by plane once or twice per year both laptop and power adapters are placed in my cabin suitcase. So carrying two of them it's not too bothersome. At least for me.
I would avoid using one high power supply - excessive overheating causing damage and loss of warranty.
It's not a technical problem. It's a compliance one. The reason for two power supplies is due to government regulation. Manufacturers cannot make a power supply adaptor that is rated higher than 330W. Since the draw of the laptop is higher than that... they must use two PS's to work within the legal requirements.
Ok. I didn't know about it. Thanks for explanation. For me it doesn't change anything at least for the time being. I have to use two ones. I rather doubt there is a possibility of using one high power supply adaptor.
jphughan
11 Legend
•
13985 Posts
•
79931 Points
10160
0
Posted May 17th, 2019 07:00
The Setup and Specifications document (link below) does not differentiate between the two connectors in the Setting Up section or the Back View section, so it doesn’t seem to matter which one you plug into which port. Link: https://www.dell.com/support/home/us/en/04/product-support/product/alienware-17-area51m-laptop/manuals