I recently purchased the Alienware 32" AW3225QF 4K 240Hz OLED gaming monitor. Everytime I start my computer, the monitor defaults to 120Hz. The only way I have found to force the monitor to 240Hz is to:
Windows System Settings -> Display -> Use HDR -> Off
Dell Monitor OCD ->Display -> Smart HDR -> Off -> then -> Smart HDR -> On (I use HDR Peak 1000)
The above steps do set the monitor to 240Hz, but hoping there is a solution to always have the AW3225QF boot with 240Hz active.
I have installed the latest drivers for the monitor. When I load into Windows 11, under the monitor refresh rate (Display -> Advance Display -> Chose a refresh rate -> Windows only lists 120 hz as an option. In Nvidia's Control Panel (NVIDIA Control Panel -> Display -> Change resolution -> Refresh rate -> it also only lists 120 Hz as the displays refresh rate.
It is a perplexing issue and the only way to force the monitor to 240 hz is as follows:
Windows System Settings -> Display -> Use HDR -> Off
Dell Monitor OCD ->Display -> Smart HDR -> Off -> then -> Smart HDR -> On (I use HDR Peak 1000)
I am assuming you mean Display Screen Compression? If so, I couldn't find a way to enable or disable it online. I am using an NVIDIA 4090 GPU with a AMD Ryzen 9 7950x3D. If you can point me to the right software to enable DSC, I'll give it a try. I have the Alienware AW3225QF connected to my 4090 via a Display Port cable. Thanks for the idea.
@MynusTen Some monitors support turning DSC on/off from within the monitor OSD. However, I am not sure about this monitor as the manual shows nothing regarding being able to turn DSC on/off.
The fact you disable Windows HDR to enable 240 Hz points to an issue with bandwidth in my opinion.
Could also be the monitor file has a bug in it, but I doubt it. You are using 8 or 10 bit display signal?
"DSC is a fantastic way to get more for your cabling and with DisplayPort 1.4 and DSC, you can support 4K at up to 120Hz with 30-bit/px color and HDR-enabled"
I would try the HDMI 2.1 port, as that one according to the manual also supports HDR 240 Hz.
Changing the cable to HDMI 2.1 solved the problem. Now, when booting into my PC with the HDMI cable connecting my AW3225QF to my Nvidia 4090, the monitor is always set to 240 Hz. I did have to recalibrate everything, but very easy to do with Window's HDR calibration software.
Thanks for the idea and I guess this is partially resolved. I'll keep an eye out for firmware updates.
@Vanadiel agree; I read the samething in the AW3225QF manual that DP 1.4 supports 4K @ 240 Hz. My bet is its a firmware thing and it will be fixed with updates. If Alienware can replicate, hopefully, it can find a solution.
All must start a case with Dell Support. They need to first verify the warranty and ownership status. Click the "Get Help Now" icon on the right to start a live chat session. Provide to them the private AW3225QF Service Tag.
Using the provided 1.8m/5.9ft DP 1.4 cable, DP 1.4 should support 3840x2160 240Hz, DSC, HDR Using the provided 1.8m/5.9ft HDMI 2.1 FRL cable, HDMI 2.1 should support 3840x2160 240Hz, DSC, HDR, FRL eARC
Did you test the provided DP 1.4 cable on all of the 4090 DP out ports? Did youtest another DP cable?
Vanadiel
8 Professor
•
7094 Posts
•
29695 Points
0
0
Posted January 15th, 2024 20:36
It should be at the refresh rate you set it at under Windows. Set Windows 11 monitor refresh rate
Be aware you need to install the monitor driver in order to get the proper selection menu.