UNSOLVED

LukeDouglas

updated

3 years ago

L

LukeDouglas

1 Rookie

•

27 Posts

0

782

November 25th, 2023 00:20

Aurora R7, upgrading primary drive from 256GB to 2TB

My Aurora R7 came with a 256GB primary SSD and a 2T secondary SSD.  However, I'm running out of space on my primary SSD  (10.2GB free of 222 GB), even after deleting non-critical files.  I would like to update to a 2T SSD.  

From the Setup and Specifications, I'm assuming the U.2 Drive PCIe NVMe up to 32 Gbps (U.2 drive) is the issue as it allows capacity up to 280 GB. There is a 3.5" and 2x 2.5" hard drive slots.  So this system only comes with the two SSD drives slots.

Am I correct that I can't put a 2TB SSD drive in the U.2 Drive PCIe NVMe?

So basically I'm stuck.  My only option is to create a 512GB partition on my 2T drive (1.32 TB free of 1.81 TB), mirror my primary drive to the 512GB partition, reassign my primary drive to G:, assign my new partitioned drive to c:, reboot and it should work.

Does this sound like a plan or does anyone have a better idea?

(edited)

  • Chino de Oro

    11 Legend

    •

    8569 Posts

    •

    47224 Points

    0

    1

    Posted November 25th, 2023 01:09

    The same questions were asked and answers were given.  Take a look at your posts from a couple years ago.

    https://www.dell.com/community/en/conversations/alienware-desktops/aurora-r7-upgrade-primary-ssd-256gb-m2-to-2tb-m2/647f932df4ccf8a8de530a4a

  • LukeDouglas

    1 Rookie

    •

    27 Posts

    0

    0

    Posted November 25th, 2023 02:56

    @Chino de Oro​ Yea, the issue is that the slot for the primary drive is restricted to 280gb.  I've just decided to buy a new R16.  I've had the R7 for 5+ years and I use it for business.

    I see no options to delete threads or mark as resolved.

    (edited)

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    0

    0

    Posted November 25th, 2023 03:03

    This is what it supports for storage drives:

    Type Interface Capacity
    One M.2 2280 solid-state drive SATA AHCI 6 Gbps Up to 2 TB
    One U.2 drive PCIe NVMe up to 32 Gbps (U.2 drive) Up to 280 GB
    One 3.5-inch hard drive SATA AHCI 6 Gbps Up to 2 TB
    Two 2.5-inch hard drives SATA AHCI 6 Gbps Up to 2 TB

    • with a U.2 drive, the U.2 drive is the primary drive
    • with an M.2 drive, the M.2 drive is the primary drive.
    • without both U.2 drive and M.2 drive, the 3.5-inch drive is the primary drive

    You first have to figure out what your current drive configuration exactly is, if you wish to change boot drives.

    The U2 drive is a U2 not an M2. M2 will not work in that slot.

    The M2 is 2280 form factor, but SATA interface, not NVMe interface.

    Since all your drives are SATA AHCI 6 Gbps, except for the U2 drive, your best option is to simply add a 2.5" SATA drive, as the transfer speed will be equal to all the other slots regardless of form factor. (besides the U2).

    I am also sure the U2 is used for the Intel Optane interface, so it's not necessarily the real boot drive.

    U2 drives are very expensive because they are enterprise grade interfaces, which costs extra money.

    You can check your U2 drive, see if it looks like this optane drive: https://www.newegg.com/intel-optane-ssd-905p-series-960gb/p/N82E16820167463

    Pretty sure it's an optane module: U2 drive replacement Procedure

    It uses a caddy and a special data cable to connect the drive to the motherboard. Again, this is not an M2 so purchasing an M2 SSD will not work...

    (edited)

  • Chino de Oro

    11 Legend

    •

    8569 Posts

    •

    47224 Points

    0

    0

    Posted November 25th, 2023 03:52

    Maximum capacity in specifications is not a restriction.  It's a validation of tested components to be used with your system.  The storage capacities Dell used at the testing phase were limiting to OEM stocks available for system configurations at that time.  

    For storage components that use standard specifications such as serial ATA or PCIe NVM express, drives with higher capacities available in the markets at later date have been known to work beyond the specifications.

    Community contributors did provided many feasible inputs which would solved your storage issue with your benefits in mind as U.2 drives are too costly to be used in consumer systems.  You don't need to delete a thread just because it's unresolved.  If you were to close the old thread, just mark a helpful post as Accepted Answer as you did in this current thread.