Aurora R14, Nvidia RTX 4070, System Fan 3/4 failure
My current setup:
AMD Ryzen 5 5600X
32GB Ram
Nvidia RTX 4070 GPU
512GB SSD, 2TB HDD
750w PSU
I recently installed the Nvidia RTX 4070 GPU which previously had an AMD Radeon 6500XT. Upon boot up I am taken to the BIOS screen and it says, "System Fan 3, 4 failure, Error Code: 2000-0511". Ran diagnostic with no fix. I have confirmed the GPU fans run at startup, and have downloaded Afterburner to test the fans as well. Also there are no fans installed in System 3 and 4 on my computer. I've made sure everything is up to date across the board.
My PSU has two 8 and 6 pin connectors. I've tried both of them. Nothing else was touched while installing the GPU. During the Dell chat they said the 4070 wasn't compatible with my system? I asked why, but they wouldn't answer me. I ran MSFS 2020 on it with great success, and had my VR working flawlessly (VR didn't work on the Radeon 6500). Everything was smooth and much better than my previous setup, and I am very happy with the result. However, the fan error on startup is annoying.
Hey thanks for the link, and getting back to me. I guess upgrading components is a known issue with Dell.
When I first contacted support they stated the 4070 was compatible with my computer, but others have said it definitely is. I also assume they are just reading off a list of answers from a computer?
I wonder if installing a System 3,4 fan would alleviate the error?
I had this same problem but i fixed it. My R14 didn't come with the two extra fans. So in order for it to stop giving me the error message, I had to buy two fans with a built in Tach and then install them. Power off the PC and unplug it for a few, install the fans, then boot it up and it'll register the new fans.
Yes, How did you mount the fans? not any fan will fit in this tower. But I'm over this fan error. I think it causing other issues with how my pc runs as well.
@Shane2506 I just ordered two 120MM PWM fans. You have to make sure they have the speed sensor in them so the PC can determine how fast they're going. As long as they're decent high RPM fans then they'll work. I also used some long rubber fan mount screws and mounted them using holes that were already there in the metal grill on the top and the front.
xphoto21x
1 Rookie
•
2 Posts
33
1
Posted August 8th, 2023 12:00
Hey thanks for the link, and getting back to me. I guess upgrading components is a known issue with Dell.
When I first contacted support they stated the 4070 was compatible with my computer, but others have said it definitely is. I also assume they are just reading off a list of answers from a computer?
I wonder if installing a System 3,4 fan would alleviate the error?