UNSOLVED

alien lover

updated

5 years ago

AL

alien lover

1 Rookie

•

11 Posts

0

10937

November 29th, 2021 16:00

Aurora R13, Gen 4 x4 NVMe SSD recommendation?

Hi,

I am planning to take advantage of the Z690 chipset and add a Gen 4 x4 NVMe drive. Any recommendations on brand?

I am considering the Samsung 980 PRO 2TB PCIe Gen 4 x4 NVMe.

Thanks in advance for your thoughts. 

 

 

  • ivorytower 46

    1 Rookie

    •

    24 Posts

    4567

    0

    Posted November 29th, 2021 16:00

    The Samsung is excellent as a PCIe 4 drive. Sabrent Rocket 4 plus is also excellent and has a 5 year warranty. Both cards read about  7 Gbs. The Rocket has heat sinks available to deal with heavy use.

  • alien lover

    1 Rookie

    •

    11 Posts

    4528

    0

    Posted November 29th, 2021 23:00

    Thank you for the input.  Regarding the heat sink, I was planning to use the second SSD slot on the motherboard and it is okay to use a heat sink when using this slot?  I also read that several people suggest purchasing a NVMe Adapter M.2 PCIe Card Adapter as keeping the NVMe drive off the motherboard will result in much lower temps.  

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    4483

    0

    Posted November 30th, 2021 11:00

    I hate it when they use the same numbers for different systems.

    R13 desktop storage specifications 

  • CraigRGB

    14 Posts

    4487

    0

    Posted November 30th, 2021 11:00

    The specifications link Vanadiel provided is not for the Aurora R13 desktop.  His link is for specifications for the Alienware 13 R3 laptop.  I'm assuming that all Z690 boards have PCIe 4.0 or even 5.0

  • alien lover

    1 Rookie

    •

    11 Posts

    4459

    0

    Posted November 30th, 2021 15:00

    Thanks all for the feedback and confirming the Gen 4 support.  That being said, I am planning to go with the Samsung 980 PRO 2TB NVM3 drive and use the slot located on the motherboard.  

    The Samsung specs states "To ensure stable performance, the 980 PRO uses nickel coating to help manage the controller’s heat level and a heat spreader label to deliver effective thermal control of the NAND chip".   

    Do this mean I shouldn't need to add a heat sink for the drive?  I am newer to using NVMe drives and appreciate anyone's experience and/or opinions.  

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    3206

    0

    Posted November 30th, 2021 16:00

    Mine came with a large heatsink attached to it, but the 980 Pro is a better drive.

    Mine is a Corsair MP600 Core. Practically you are not going to see the difference between 7000 and 5000 MB/s.

     

    CrystalDiskMark_20211123235005.png

  • MARSSIVPilot

    1 Message

    4374

    0

    Posted December 2nd, 2021 16:00

    Did a second NVMe drive work in the system?  I'm a little confused because the R13 desktop storage specifications states it only supports two configurations.  One NVMe or NVMe and one 3.5-inch hard drive...  This can't be correct??  The motherboard has 2 NVMe slots, one 3.5 bay and one 2.5 bay?  Please confirm - My system arrives tomorrow.  Thanks!

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    4365

    0

    Posted December 2nd, 2021 18:00

    It's very confusing, since the board has the following interface connections:

     

    - 3 x SATA 6 Gbps connectors (8, 9, 10)

    - 1 M2 slot (7)

    - 1 M2 slot (15)

     

    R13 Board Layout 

     

    According to the specifications, it only supports one of these configurations:

     

    One M.2 2230 solid-state drivePCIe Gen3/Gen4 x4 NVMe, up to 64 Gbps Up to 256 GB

    One M.2 2280 solid-state drive PCIe Gen3/Gen4 x4 NVMe, up to 64 Gbps Up to 2 TB

    One 3.5-inch hard drive SATA AHCI 6 Gbps Up to 2 TB

     

    According to the connectors on the board, it should support:

     

    3 x SATA 6 Gbps drives.

    1 x M2 drive 2280

    1 x M2 drive/card 2230

     

    It's possible some of these are shared with other lanes, or somehow are not usable.

    I am not sure, maybe someone with an R13 could shed some lights on this.

  • alien lover

    1 Rookie

    •

    11 Posts

    4357

    0

    Posted December 2nd, 2021 20:00

    Mine arrives on 12/3 as well so I have not yet installed the drive.  I can't imagine that both NVMe slots are unable to be used simultaneously as that would make no sense.  I will let you know after this weekend. 

     

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    3755

    0

    Posted December 3rd, 2021 03:00

    1 M2 slot only accepts 2230 form factor, while the other accepts up to 2280 form factor.

    You typically use the 2230 for add-on cards like a wireless card, although the manual says it supports drives up to 256 GB.