my config says i should have 4400 but I just realized I have 4800 memory speeds is that enough to cause crash freezes on R13? i have 2 32x sticks i bought before knowing about the configs. idk when my pc started acting up before or after but my display sometimes doesnt work and pc sometimes freezes lags apphangs. if i plug the power cord in after i unplug it, it will boot then shutoff right away. but when i removed 1 of the memory sticks it didnt shutoff only when i have 1 of them or 2 of them it does that and my memory test was all good with memory86.
Also I just bought a new GPU. I turned my computer on. I had to turn it on twice. The monitor did not display so I press control all windows B to reset the graphics drivers and the monitor came on but the LED lights on my computer are not on and the fan GPU is not on
I installed an NVIDIA 4070 Super Ventus 2x 12GB. Another issue occurred today: my PC booted with no USB power and no video until I restarted it. Additionally, if I unplugged a USB device during that state, the keyboard light would power up for a second and then power off.
This is my GPU in an idle state after boot also if that helps
and this is what i meant works sometimes only if the keyboard lights are on and the usbs work but the monitor doesnt and it made it to windows
ProfessorW00d
6 Operator
•
2373 Posts
•
10247 Points
0
0
Posted December 22nd, 2024 03:16
The RAM you have is listed as "compatible with the Aurora R13" on the Crucial web site. Post a snip of the SPD and Memory tabs in CPU-Z.