UNSOLVED

Strawpedro

updated

5 years ago

S

Strawpedro

1 Rookie

•

27 Posts

0

1570

October 16th, 2021 14:00

Aurora R12, DisplayPort not working after updating bios 1.1.7

I have RTX3090 and Samsung odyssey G7, after flashing bios update, no signal on the monitor…

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    1392

    0

    Posted October 16th, 2021 17:00

    Which bios, motherboard or video card?

  • Rabbitdude

    2 Intern

    •

    509 Posts

    1381

    0

    Posted October 16th, 2021 21:00

    1.1.7 is the mobo bios for r12

  • nl252

    9 Posts

    1307

    0

    Posted October 20th, 2021 16:00

    Im having the exact same issue after updating from bios 1.1.2 -> 1.1.7

    Have a 3080, and now getting no output after startup through DP,  had to switch to hdmi.

     

    Edit: using an LG 34UM65 monitor

  • Wardski1974

    2 Intern

    •

    189 Posts

    1292

    1

    Posted October 20th, 2021 19:00

    By any chance did you update to 1.0.0.3 firmware on the RTX 3090?  I have a feeling this Bios upgrade requires the video card update as well.  The firmware is for all 3080 and 3090 cards (TI, etc)

    If you haven't tried the video card firmware update yet, then I would do this first and see if the issues persists.  The Nvidia update came the day after the Bios, so I would suggest it is related to 1.1.7 mobo bios update..

    https://www.dell.com/support/home/en-au/drivers/driversdetails?driverid=w01pk&oscode=wt64a&productcode=alienware-aurora-r12-desktop

  • Strawpedro

    1 Rookie

    •

    27 Posts

    1284

    0

    Posted October 20th, 2021 20:00

    yes i have, i requested and a tech came to replace the MB since i couldnt get signal in HDMI either... but now my new MB's BIOS seems locked and i cant update

  • Rabbitdude

    2 Intern

    •

    509 Posts

    1281

    0

    Posted October 20th, 2021 22:00

    It's not related. 1.1.7 is just a security patch, no changes other than security updates in regards towards Windows 11. New video firmware is for the DSC bug which the OP would have known about and experienced prior anyway if they were using DP they would have no post signal.

  • nl252

    9 Posts

    1257

    0

    Posted October 21st, 2021 08:00

    Thats a very good point, The R12 z490 mb 1.1.7 bios and the 3080 1.0.0.3 vbios updates happened at the same time for me.

    This more likely was caused by that 1.0.0.3 update. Is there any issue or challenge to rolling back my vbios to 1.0.0.2 to see if that resolves this?