Tesla07

updated

5 years ago

T

Tesla07

14 Posts

0

1087

July 17th, 2021 19:00

XPS 8930, replacing failing "D" HDD with 3 drives under warranty

My computer took 5 boot up attempts before it succeeded. I haven't turned it off since and everything working perfect. It did it's own self diagnostics, created a QR code of which I was able to order the failing drive under warranty with my phone, I was impressed. Now I got the drive, looking for the best way to do a seamless swap. I have backed up my system and did a second backup of D alone. I have a 4th SATA / power cable and was thinking of temporary initializing and formatting with "Disk Management" as a Z drive. The question is once it is all loaded can I unplug the failing D drive and then rename Z to D?  Also the system may not boot up again, wood it be better to remove the D drive and install new drive at the start? Interesting, chckdsk says there are ZERO errors on all my drive, it thinks all fine. Running Dell diagnostics again, it says D "failure"

I can't find any videos on replacing one of three drive. I don't want to lose my data on C and F, I'm glad it's not the C drive, I'm hoping this is fairly simple. Please advise. 

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    892

    0

    Posted July 18th, 2021 11:00

    Did it give you an error code?

    Might just be easier/safer just to swap out the old drive and install the new one first. Then initialize the new one in Disk Management and Win 10 should assign the next available drive letter, which should be D. Then copy your backup files onto the new drive. You have a backup of D, but you don't want to risk the old D drive until you safely have everything on the new HDD.

    But if you prefer, you can leave D connected, install and image the new HDD and assign it an unused  drive letter (Z: might not be a good choice). And after you remove the old drive, you can use Disk Management to assign drive letter D to the new drive.

  • Tesla07

    14 Posts

    884

    0

    Posted July 18th, 2021 14:00

    Thanks, I did not get an error code. Ok, I will try the drive swap first. I am concerned it may not boot up after power down. I'm not convinced a failing secondary drive will stop the computer from booting up. Can't find any instances on Google where a secondary drive failing causing boot up problems. I will keep you updated. 

    How do I remove the data off the drive I am sending back to Dell? They want it.

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    883

    0

    Posted July 18th, 2021 14:00

    You'd have to reinstall that old HDD in the PC (or put it in a USB external drive enclosure) and use something like DBAN (free) to wipe it.

    So that might lean you to installing the new drive along with the old one. Moving your files onto the new HDD and then using DBAN to nuke the old one and then taking the old one out...

    Don't think you'll have any issues rebooting as long as the C: drive is functional.

  • speedstep

    11 Legend

    •

    46969 Posts

    830

    0

    Posted July 27th, 2021 05:00

    @Tesla07  

    F12 booting requires secure boot off.

    Wipe drive works with all pcs all os.

    NSA certified dod wipe

    https://www.whitecanyon.com/home-products/wipedrive

     

  • Tesla07

    14 Posts

    832

    0

    Posted July 27th, 2021 05:00

    Everything works, I just want to wipe the drive before I send back but I can't get the bios to boot from the ISO DVD I made of Dban. I looked on line for help. I pres F2, go to boot order and it thows me out when I press enter to a normal boot. Secure boot is on, somewhere I read it must be off. I'm afraid of doing something wrong and bricking my boot up sequence.  I can't find an example of booting from DVD on my computer XPS 8930, do you know of one?

  • Tesla07

    14 Posts

    802

    0

    Posted July 28th, 2021 08:00

    Thanks, Whitecanyon doesn't offer a free version for home, only the enterprise 100 license version, figure that. I found that I had the utility in my Acronis backup app that worked. Thanks for everyone's help.