In a last hope posting, before I throw my EVGA GTX 1050 back into the static bag and wait until I do a new build....
I'm hoping someone will have a new idea I've not yet tried during the 8 hour project of trying to get this card to work. I'd like nothing more than to find some obvious dumb mistake I've been making.
After copious research for a card I could use to in the 8500 to replace the noisy and obsolete GT 620 (preferably without a PSU upgrade), I settled on the EVGA GTX 1050 single fan. No gaming here, so the combo of size and convenience of just plugging into the MB for power - looked like a 30 minute job. I've seen others report successfully using the GTX 1050 (and/or ti) in the XPS 8500.
I've had no joy. And I've searched and tried the fixes in nearly every relevant Google listing I could find. Here's what I've tried - not in exact order, because frankly, I'm so brain fried at this point I can't remember exactly and have been through some steps multiple times.
Removed old card. Switched to MB VGA Removed all NVidia drivers using Driver Fusion
Removed all remaining NVidia trash files using IObit Uninstaller Installed GTX 1050
Ran EVGA installation utility from for Win 7 (custom install: Graphics Adapter only - not a gamer)
End up with black screen after the Dell splash and 1050 is not being recognized in Device Manager or Belarc Advisor. So, BIOS, right?
I've been running A12 since it was released. I've been through a lot of BIOS settings. It seems success has occurred for others only with settings on Legacy CSM and secure boot disabled, which I've also done.
I have been able to get a DVI display connected to the GTX 1050; however once I install the Win 7 64 bit EVGA drivers - I'm back to black after the splash.
Two thoughts I have, but really don't want to do unless someone else has had success with them.
My BIOS version is 3 days older than the latest version. I tired to use the Windows/Dell BIOS flash, but since it's the same version (albeit different build dates) it doesn't give me the option to flash. I wonder if the USB update method might work - but is there a relevant difference for this issue between the builds?
I'm running windows 7 Pro - Wondering if finally biting the bullet and upgrading to Win 10 would make any difference. I know eventually I'll need to if I want to get the most out of the new GPU, but I've been stubborn.
I have a 8500 and while I do not have a 1050 card I installed a EVGA GTX 660 a few years back and had no issues at all. The 660 uses the extra power connector which I believe yours does not need. One thing is I never ever use the drivers that come with the card. I always go direct to Nvidia and download the latest reference drivers. I have always done this with every Nvidia card I ever installed.
I did nothing to the BIOS to get the 660 to work. My Dell came with a GT-640 card which I had already installed the latest Nvidia reference drivers for. I pulled the old card, put in the new card and was done. No drivers required. The 1050 and 620 use the exact same drivers so you should be able to install the latest 390.65 drivers with the 620, then pull that card, insert the new card and it should just work, no new drivers required. If not there is some other issue. I have switched various Nvidia cards like this many times.
Thanks for the reply. And yes, I did go to the NVidia site to DL the drivers, rather than use the DVD in the package.
I've reinstalled the GT 620 temporarily - along with removing the GTX 1050 drivers and re-installing the GT 6xx pack from NVidia. I may give plugging in the new card a try again as you suggested. However I've seen posts indicating the BIOS needed to be at least A11 with Win7 or A12 with Win10 - along with some changes from the default settings for the GTX 10XX cards to work with the XPS 8500.
You mentioned that changing "Legacy CSM" settings didn't help. Take a look at this post from Nvidia, where they recommend "Disable Secure Boot. Set CSM (or compatibility or legacy mode) to enabled". Typically, disabling Secure Boot will require the OS to be reinstalled, using external boot media like a USB stick.
Greetings friends, I have a similar problem with my XPS 8300 and video ASUS GTX 1050ti. The problem is that the computer works well with windows 7 and windows 10 but the video output that works for me is only the DVI - HDMI connected to my sony bravia TV. The other video outputs do not work since my monitor is not activated when connected to any of them. While I had it installed on my TV, I also noticed that a few days later windows 7 or 10 started to show malfunctions, blue screen and loss of options in the drop-down menus.
3dcrypto
4 Posts
1691
0
Posted January 15th, 2018 08:00
I have a 8500 and while I do not have a 1050 card I installed a EVGA GTX 660 a few years back and had no issues at all. The 660 uses the extra power connector which I believe yours does not need. One thing is I never ever use the drivers that come with the card. I always go direct to Nvidia and download the latest reference drivers. I have always done this with every Nvidia card I ever installed.
I did nothing to the BIOS to get the 660 to work. My Dell came with a GT-640 card which I had already installed the latest Nvidia reference drivers for. I pulled the old card, put in the new card and was done. No drivers required. The 1050 and 620 use the exact same drivers so you should be able to install the latest 390.65 drivers with the 620, then pull that card, insert the new card and it should just work, no new drivers required. If not there is some other issue. I have switched various Nvidia cards like this many times.
I am on Win 7 pro.