UNSOLVED

zaboomafoozarg

updated

20 years ago

0

10452

February 15th, 2007 04:00

Will my Dell XP work if I switch mobo and CPU?

Or, if it doesn't work, can I contact Microsoft and get it authorized to work? Just curious, I want to keep the parts I have in here now (Dimension 8400) but upgrade to a new motherboard, core 2 duo, case and RAM.
  • 255

    0

    Posted February 15th, 2007 08:00

    If the mobo is a Dell mobo, then you should have received a bios flash disc with the mobo so that you can flash the bios with your service tag number. You will not be prompted for the product key for the operating system if the installation cd can see a service tag in the bios. You can still use the Dell cd to reinstall the os on your system even if there is no service tag listed in the bios as long as you have the product key for the operating system, which is found on the case or your computer. To activate the software is another story. It may install fine and you can use it okay, but unless you activate the software you will not be able to install any MS updates. In order to activate it you may need to call Microsoft to validate your os, often when you explain to them what you did they will give you an activation number.
  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    255

    0

    Posted February 15th, 2007 09:00

    There are also hardware (case) issues with upgrading a Dell to a non-Dell motherboard.  The Dell's use a proprietary size for the mother board and there will be mounting issues as the mounting holes for a non-Dell board will not match up.  Also there will be problems with the rear I/O matching up.  And finally, Dell uses a proprietary connector (and undocumented) for the front panel power switch.  You will be "on your own" to come up with a standard connector and finding the correct wires in the Dell connector to connect to.
     
    Most that upgrade avoid all the hassles and just buy a new standard case and power supply.
    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • 255

    0

    Posted February 15th, 2007 12:00

    Alright thanks. And yeah fireberd, as I mentioned at the bottom of the first post, a new case and PSU will be used as well. That's the thing with these Dells, more proprietary than I like.
  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    255

    0

    Posted February 15th, 2007 13:00

    Sorry, it was early in the morning (in Florida) when I posted - must not have been awake  
    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • 255

    0

    Posted February 15th, 2007 15:00

    haha yes 5:30 is a bit early. well i might give it a go one of these days and see what happens.
  • simpswr

    2 Intern

    •

    3224 Posts

    255

    0

    Posted February 15th, 2007 20:00

    My bet is that when you start installing from the Dell XP disc, you will get a message that it will only install on a Dell and quit
  • 255

    0

    Posted February 16th, 2007 03:00

    Yeah... the more I think about it, the more likely it is that I'll just wait until Vista SP1 comes out (and everything gets patched up) and upgrade then.