UNSOLVED

Alexanderl2

updated

13 years ago

A

Alexanderl2

1 Rookie

•

7 Posts

0

50002

May 29th, 2013 20:00

Unable to turn on iRST on Inspiron 7520 (15R SE) with Windows 8

I have Inspiron 7520 with HDD and self-installed SSD on mSATA. I clean-installed Windows 8 in AHCI mode.

Now if I change SATA mode in BIOS to iRST the system won't boot.

If I try to install windows 8 with BIOS SATA set to iRST, installer asks for a driver, copis files to hard drive, but is unable to boot on the first installation reboot.

Does anyone have any suggestions? How does DELL install Windows 8 with iRST? I cannot find any instructions on DELL support regarding clean installation with iRST.

Please help,

A.L.

  • sandeep_par

    4 Apprentice

    •

    1472 Posts

    1630

    0

    Posted May 29th, 2013 23:00

    Hi Alexanderl2,

    You can keep the windows on SSD and data on the harddrive. This would ensure faster boot time and better performance on the system.

    Intel® Rapid Start Technology can only be enabled if the system was shipped with a Pre-Configured 8 GB Hibernation partition on the SSD.

    This partition would not be there on the self-installed SSD. If by any chance you have the partition then you can enable the same using steps below:

    1. On the Intel Rapid Storage window, click Accelerate. and then Select Device.Intel Rapid Start Technology
    2. Select the Primary Hard Drive for acceleration and click OK
      Intel Rapid Start Technology
    3. The primary hard drive is now accelerated using the mSATA SSD.
      Intel Rapid Start Technology

    If you have any further queries, please feel free to contact us.

    Thanks and Regards
    Sandeep P
    #iworkfordell

  • Alexanderl2

    1 Rookie

    •

    7 Posts

    1630

    0

    Posted May 30th, 2013 00:00

    Sandeep,

    The Windows is installed on HDD and I want to use SSD as a cache, but I cannot click on Accelerate button because the BIOS is not in the iRST mode and there is no Accelerate button visible.

    The original question remains: How do I install Windows 8 with Rapid Storage and Rapid Start enabled on Inspiron 7520? It has to be installed on HDD and use SSD as a cache drive,

    Thanks in advance,

    A.L.

  • sandeep_par

    4 Apprentice

    •

    1472 Posts

    1631

    0

    Posted June 3rd, 2013 04:00

    Hi A.L,

    Apologies for the delayed reply. As the option for accelerate is not available it might not be possible.

    As we stated in the earlier post"  Intel® Rapid Start Technology can only be enabled if the system was shipped with a Pre-Configured 8 GB Hibernation partition on the SSD"

    If you have any further queries, please feel free to contact us.

    Thanks and Regards
    Sandeep P
    #iworkfordell

  • arkitekts

    5 Posts

    1627

    0

    Posted August 8th, 2013 14:00

    Hi Sandeep

    I recently got a 128gb crucial msata ssd drive installed into my computer. Dell sent me a Windows 8 Recovery Media DVD to Install windows on my SSD. The BIOS already shows that the msata ssd is identified and the setting is already AHCL however when I save settings and enter is say Fail even when I put the DVD in and reverts to booting windows from the Main hardrive. Can you help me with this please??

  • sandeep_par

    4 Apprentice

    •

    1472 Posts

    1627

    1

    Posted August 9th, 2013 05:00

    Hi arkitekts,

    We do not suggest to recommend installing Windows on MSATA drive. As it should be used as a cache device. If you still want to install windows on MSATA drive then you can follow the tutorial below:

    http://dell.to/15Cz2AS

    Keep us posted with the results so we can advise you further.

  • arkitekts

    5 Posts

    1627

    0

    Posted August 9th, 2013 06:00

    When you say boot from the Windows 7 or 8 CD/USB drive do I insert my Dell Operating System DVD that also says "Already installed on your computer" Windows 8 Recovery Media for Windows 8 Products 64bit into the laptop and then follow your steps. I am writing this because I inserted it in and there was no option to "Repair your computer" it just had 'Install Now'.

  • arkitekts

    5 Posts

    1627

    0

    Posted August 9th, 2013 07:00

    Do you have a direct line that I can call you on please I think it will be much easier? Do I load the DVD on my desktop because when I do the only options I get are to install updates, the next screen is to keep Windows setting/apps and the other choices are Keep personal files and nothing. The last page is Install Now without any other buttons/options.

  • sandeep_par

    4 Apprentice

    •

    1472 Posts

    1627

    0

    Posted August 9th, 2013 07:00

    Hi arkitekts,

    Thanks for providing us this information. You should use dell operating system DVD to boot the system and then you can choose repair your computer. Please check this image for reference:

    If you have any further queries, please feel free to contact us.

  • sandeep_par

    4 Apprentice

    •

    1472 Posts

    1627

    1

    Posted August 9th, 2013 08:00

    Hi arkitekts,

    Thanks for your reply. You would need to boot from the Windows disk. Please insert the disk and then turn off the system.

    Press the power button and keep tapping F12 key to access one time boot menu.

    Once you are there select the CD drive to boot from the CD.

    And then you would be able to access "Repair your Computer" option.

    If you wish to contact us through phone then you can find our contact information at the below link:

    http://dell.to/12XFmCv

    If you have any further queries, please feel free to contact us.

  • arkitekts

    5 Posts

    489

    0

    Posted August 9th, 2013 09:00

    This is the page after setting the language