Retaining software with fresh install of Windows XP Pro
Hi all,
I have a new Inspiron 9300 with Windows XP Home since I already have a copy of XP Professional. I was wondering how I could do a fresh insall (heard this has the least problems) and retain the software that came with this laptop (Sonic suite, Dell Media Exp, PSP Studio, Norton Internet Security). Would the Windows File & Settings Transfer wizard do it?
I'm afraid you are looking at a considerable effort. The only way I know for you to get XP Professional on your machine while retaining your existing software is to perform an upgrade over the existing XP Home. I have seen a number of posts regarding the problems that can occur if this approach is chosen, and the recommendation is to do a clean install. This, of course, reformats your hard drive and wipes everything out that was originally on the drive. You must then reload all the drivers, beginnning with that for the chipset, followed by the software you wish to keep on the machine. Also, as you say this is a new machine, you probably have the Dell Diagnostics and a Restore partition. I don't think either of these will be functional if you do a clean install of XP Professional.
The pre-installed programs will not survive a clean install of XP Pro to replace XP Home, but you should be able to reinstall everything from CD or downloads burned to CD. Windows File and Settings Transfer Wizard will allow you to transfer data and settings from your current configuration to the new configuration, once everything else is installed.
The Dell PC Restore feature and image may not be useful, especially if you obtain imaging software for increased flexibility and reliability, which you can also use to save an image of the entire original system drive to CD/DVD for posterity if you ever sell the PC or wish to return it to the original configuration for some other reason.
Thanks for the quick reply. I do have the 3GB+ Dell Restore partition and a 40MBish Dell Diagnostics partition. I tried searching but could not find a good method of preserving the OEM programs.
Well, the laptop only came with the Corel WordPerfect CD. So I suppose the only way to preserve the programs is by creating an image of the hard drive?
You can not install software from a disk image. Software must be installed, therefore for any applications that you wish to preserve you must have an installaton disk
You can use imaging software to capture, preserve, and restore a copy of a drive or partition, but not to extract a program from an operating system or insert a program into an operating system.
A program installation process includes creating registry entries, creating folders and installing files, and probably much more of which I am only peripherally aware.
As a matter of policy, Dell provides everything you need to reinstall the OS, drivers, utilities, and all applications included with your PC. Since early this year, Dell provides a utility to create a CD to reinstall the OS if ever needed. The Dell Downloads site has most every driver and utility needed (in addition to those included with the operating system) to return your system to it's original basic configuration, and any commercial applications that were included with your purchase should have been accompanied by a CD for reinstallation.
The Dell Reinstall Guides provide some information regarding the process.
It doesn't seem like the Norton Internet Security 90 day version, Dell Media Experience, Paint Shop Pro Studio, Sonic Suite, etc. as previously mentioned are in the Windows XP Home SP2 CD that I created with the Dell 1 time use application on the laptop. Also, these applications are not on the Dell downloads page.
In addition, am I just bad at searching or is there no reinstallation guide for the Inspiron 9300?
Message Edited by Chang_Wufei_05 on 06-18-2005 11:10 PM
The CD created by the Dell OS Recovery Utility is for reinstalling the operating system only, and as you noted, some applications are not available from the Dell Downloads section. Those are what you need additional CDs for, or some means of reinstalling them.
I looked for the I9300 Reinstall Guide a couple of weeks ago and found it was not yet available. I don't know what's up with that, but the I9200 guide may be similar.
As you see, the software necessary for a complete system reinstallation must be inventoried and rounded up from various locations to be sure that the resources you need are in fact in your posession. If you contact Dell, they may just send out a full set of CDs. Just make sure you get everything you need.
Thanks for the help, GreyMack. I have just finished chatting with a Portable Support representative. However, I think the representative was confused and thought the issue was an OS swap and thought I was requesting a Windows XP Pro CD. She told me I would have to take up the issue with Customer Care on Monday...even when I just requested for a CD of the loaded software, she still directed me to CC.
jackshack
6447 Posts
254
0
Posted June 18th, 2005 20:00
I'm afraid you are looking at a considerable effort. The only way I know for you to get XP Professional on your machine while retaining your existing software is to perform an upgrade over the existing XP Home. I have seen a number of posts regarding the problems that can occur if this approach is chosen, and the recommendation is to do a clean install. This, of course, reformats your hard drive and wipes everything out that was originally on the drive. You must then reload all the drivers, beginnning with that for the chipset, followed by the software you wish to keep on the machine. Also, as you say this is a new machine, you probably have the Dell Diagnostics and a Restore partition. I don't think either of these will be functional if you do a clean install of XP Professional.
Good luck with whatever you decide to do.
Jack