Problem with Dimension 8400 USB and Firewire in Vista
Hello, I'm running Windows Vista Ultimate on my Dimension 8400. I've got most things working fine although I'm stuck on the following.
I have a Western Digital My Book Pro II 1TB external hard drive and when I connect it to my 8400 the Windows Found New Hardware Wizard always pops up and always never finds the drivers. I'm connecting it by USB and Western Digital say that it should show up but in Disk Management its not there, in Device manager it comes up as an Unknown Device.
WD seem to think I need to update my USB ports although the chipset on the Dell website for the Dimension 8400 is only up to XP and there is no chipset for Vista for the 8400.
Whats your opinion on the above and is there any way I can update my chipset? or do I need to?
The only chipset download I see on the Dell website is for the Dimension XPS 9200, nothing for any other systems.
Well im upgrade my 8400 to vista and now it wont reconize my wireless 1450 usb adapter. It says it cant find the drivers so im stuck with dial-up..
have you tryed the XP DRIVER
i have a laptop with Vista ULTIMATE x32 and had to use just about all of the XP driver to get it to work, works grate now no missing drivers but it is a Compaq Presario r4010 us
This is the link to the drivers i used to update my chipset after windows Vista was installed
[BUT] THE DVD HAD ALL OF THE DRIVER ON IT for my Dell Dimension 8400 except the {sound card and intel 537 dial up modem}
when i updated windows that is when
i got the sound & intel 537 modem to work,
this link for chipset if you are using raid 0 or 1 i am not sure if it will work
in my bios i have it set to autodetect/ahci and windows installed with no chipset needed witch is intel 925x/xe
I was having trouble with usb until i updated with this
i am using a western digital ext 160 gib usb drive but i still cant safely remove it because
windows thinks it is just another hard drive
this is the chipset package you need to update for the USB and chipset if you are using win Vista x32
just click on it when you get it downloaded and follow what it says to do
This utility installs INF files that inform the operating system how to properly configure
the chipset for specific functionality such as USB and AGP.
My Broadcom Netxtreme 57xx gigabit controller was on the DVD IT LOADED when windows started and went online right off the bat
but broadcom says to use the windows XP DRIVERS to install it i did not try that because it works with no problems at all!!
i have not used firewire so cant help on that. sent you a pm too.
If you have any more problems let me know and we can see if we can work them out !!!!
{ INF Update Utility [INFINST_AUTOL.EXE] (685KB) 8.1.1.1010 11/21/2006 } Download
This utility installs INF files that inform the operating system how to properly configure the chipset for specific functionality such as USB and AGP.
Read Me (txt) Release Notes (htm)
OS:Windows Server* 2003, Windows Server* 2003 Enterprise x64 Edition, Windows Server* 2003 Standard Edition, Windows Server* 2003 Standard x64 Edition, Windows Vista*, Windows Vista* 64, Windows Vista* Business, 32-bit version, Windows Vista* Business, 64-bit version, Windows Vista* Enterprise, 32-bit version, Windows Vista* Enterprise, 64-bit version, Windows Vista* Home Basic, 32-bit version, Windows Vista* Home Basic, 64-bit version, Windows Vista* Home Premium, 32-bit version, Windows Vista* Home Premium, 64-bit version, Windows Vista* Starter, 32-bit version, Windows Vista* Ultimate, 32-bit version, Windows Vista* Ultimate, 64-bit version, Windows* 2000, Windows* XP Home Edition, Windows* XP Media Center Edition, Windows* XP Professional, Windows* XP Professional x64 Edition
Hello, thanks for the reply I'll see how that goes.
I ended up formatting and reinstalling Vista, the first peice of harware I installed was the WD My Book Pro II and it is showing up in Disk Managment now which is strange, it must be a driver conflict somewhere although still I have a yellow exclamation mark in Device Management. I'll install that chipset and see what happens!
Just updated with it although I'm still getting the same yellow exclamation mark, below is my Disk Management and Device Mangment screen shots.
Adam it shows up in Disk management i see , does it show in my computer ?
My WD DRIVE looks the same as yours in disk management but it shows in MY computer,it shows in device manager but you know my drive and your are not the same. It does look like a driver
problem!!! did you check to see if there is a resource problem. It may give you a error code to show
WD IF YOU TALK TO THEM AGAIN.It is over my head on this one maybe some one can jump in to help you also .. maybe a good idea to post on the hard drive sec on Dimension fourm man i hope you get this worked out, i have to go and install a hard drive in a computer let us know the out come
I had a reply from Western Digital, I sent those screen shots to them as well. They say it looks fine and the exclamation mark is proberly because of the WD Button Manager driver. You see they are working on a Vista Raid Manager and Button Manager. I know so far it hasnt passed testing at WD so may be a while yet before it is released.
The drive is showing up when connected in My Computer so this now looks fine. The drive itself is only showing as 500GB in Disk Management as I have it set in Raid 1 but obviously when WD release the new Raid Manager things should work fine in Raid 1. WD said if I wanted to change it to Raid 0 then I would need to alter it on a XP machine at the moment but advised me to keep it on Raid 1 for security.
Hopefully things should be fine when WD release the new Raid Manager and Button Manager.
Jerry, have you seen WD's new product the My Book World? its one of thoughs personal server external drives. Quite a good idea those things are I think, same as my My Book Pro II though it isnt supported properly just yet with Vista.
orlandolukas
2 Posts
384
0
Posted February 27th, 2007 00:00