Due to the accumulation of numerous problems over a period of time, my sister wants to totally erase her hard drive and reinstall Win98. She really does not care about saving any data.
Does anyone know of a website or url where how-to-do this is explained in step-by-step detail ???
Boot with an emergency boot diskette. At the DOS prompt type
format c: /s and . When the format is completed, at the command prompt change to the CD-ROM drive by typing its drive letter and a colon (i.e.
D:) and . At the D:\> prompt with the Windows 98 CD in the drive type
setup and . After Windows 98 is installed she will have to install her system drivers (chipset driver first, followed by others), then applications.
You didn't identify the type of computer she has. If it is a Dell, the instructions for reinstalling 98SE are
here and she can get complete instructions for installation of drivers by using the
Reinstall guide link at the top of the page which you can reach through the Solutions tab above this forum.
She should disconnect all external peripherals from the system before reinstalling Windows.
In addition to Denny's message do not forget to disconnect all external devices with the exception of the monitor, mouse, and keyboard should remain connected, all other devices should be disconnected.
Greetings. I would like to erase my whole computer! I don't care about saving any files, I just want to fix my computer! I know how to erase the whole thing with a floppy drive, but my laptop doesn't have a floppy drive, therefore I am completely lost. If anyone could please help me, their help would be greatly appreciated! Thank you!
Denny Denham
2 Intern
•
18798 Posts
307
0
Posted October 5th, 2003 01:00
Boot with an emergency boot diskette. At the DOS prompt type format c: /s and . When the format is completed, at the command prompt change to the CD-ROM drive by typing its drive letter and a colon (i.e. D:) and . At the D:\> prompt with the Windows 98 CD in the drive type setup and . After Windows 98 is installed she will have to install her system drivers (chipset driver first, followed by others), then applications.
You didn't identify the type of computer she has. If it is a Dell, the instructions for reinstalling 98SE are here and she can get complete instructions for installation of drivers by using the Reinstall guide link at the top of the page which you can reach through the Solutions tab above this forum.
She should disconnect all external peripherals from the system before reinstalling Windows.