This commonly occurs if )1) you have more than one hard drive and the second drive has an operating system on it or (2) if you created a new partition to install Windows on without first removing the partitionwith the previously installed version of Windows on it. Did either case apply to you when you reinstalled Windows? If so, the only way I know of correcting the problem is for case (1) to disable the second hard drive, reinstall Windows after first deleting the previously installed version, creatin a new partition, reinstalling Windows, then, after Windows is installed, connecting the second hard drive, or for case (2) delete all partitions with previously installed Windows on them, create a new partiation, then reinsall Windows.
I had not seen that MSKB article before. In this particular case I am concerned that it may not apply because of the following statements on the page:
"Follow the procedure that is described in this article only to recover from a drive letter change, not to change an existing computer drive to something else."
and
"For the most part, this is not recommended, especially if the drive letter is the same as when Windows was installed. The only time that you may want to do this is when the drive letters get changed without any user intervention."
It will be if you reformat and reinstall. For what it's worth, Win XP can operate quite nicely as Drive F or any letter. XP doesn't care about letter names of drives. All your programs have to be installed again anyway and they will adjust to F: as the boot drive. What XP really sees is Drive 0 (master) and Drive 1 (slave, if present) in the bios. Letter name doesn't matter.
I had not seen that MSKB article before. In this particular case I am concerned that it may not apply because of the following statements on the page:
"Follow the procedure that is described in this article only to recover from a drive letter change, not to change an existing computer drive to something else."
and
"For the most part, this is not recommended, especially if the drive letter is the same as when Windows was installed. The only time that you may want to do this is when the drive letters get changed without any user intervention."
I concur. This would be a bad idea, a reinstall is the way to go.
volcano11
2 Intern
•
27973 Posts
608
0
Posted October 2nd, 2005 19:00
This commonly occurs if )1) you have more than one hard drive and the second drive has an operating system on it or (2) if you created a new partition to install Windows on without first removing the partitionwith the previously installed version of Windows on it. Did either case apply to you when you reinstalled Windows? If so, the only way I know of correcting the problem is for case (1) to disable the second hard drive, reinstall Windows after first deleting the previously installed version, creatin a new partition, reinstalling Windows, then, after Windows is installed, connecting the second hard drive, or for case (2) delete all partitions with previously installed Windows on them, create a new partiation, then reinsall Windows.
Steve