VNXe3100 -- Crear un storage pool con 8 discos + 1 en spare
I have a VNXe3100 array and I can't create, manually, a storage pool with 8 disks in raid 5 + 1 spare disk.
Since web application tool only lets me create one storege pool with a maximum 6-disc in RAID6 (4 +2) and then I can't do anything with the rest 3 discs in the array
Hey - The VNXe has very specific templates by which you can configure your storage. That design was intented to make purchasing of additional disks as simple as possible. A few questions:
Do you have SAS or NL-SAS?
On a 3100, SAS drives can either be 4+1 R5, 3+3 R5 while NL-SAS would be 4+2 R6.
These are the details of the raid type and number of disks that you can use to create a pool in VNXe
General purpose storage
Pool
Disk type
RAID
Allocation
Capacity
NL-SAS
RAID 6 (4+2)
NL SAS disks are allocated in multiples of six in RAID 6 [4+2] groups with no assigned spare disks.
For example if forty-five NL-SAS disks are available, the Capacity pool will use forty-two of the disks (in seven, six-disk groups), will not allocate any spare disks, and will leave three disks unassigned. Spare disks can be assigned manual using the Manually add disks to an existing pool option in the Disk Configuration wizard.
Performance
[VNXe3300]
SAS
RAID 5 (6+1)
SAS disks are assigned in multiples of seven in RAID 5 [6+1] groups. A spare disk is assigned for the first 0-30 disks, and then another spare disk is assigned for each additional group of thirty disks.
For example if forty-five SAS disks are available, the Performance pool will use forty-two of the disks (in six, seven-disk groups), allocate two spare disks, and leave one disk unassigned.
Performance
[VNXe3100]
SAS
RAID 5 (4+1)
SAS disks are assigned in multiples of five in RAID 5 [6+1] groups. A spare disk is assigned for the first 0-30 disks, and then another spare disk is assigned for each additional group of thirty disks.
For example if forty-five SAS disks are available, the Performance pool will use forty disks (in eight, five-disk groups), allocate two spare disks, and leave three disks unassigned.
Extreme Performance
EFD
RAID 5 (4+1)
EFD disks are allocated in multiples of five in RAID 5 [4+1] groups. A spare disk is assigned for the first 0-30 disks, and then another spare disk is assigned for each additional group of thirty disks.
For example if forty-five EFD disks are available, the Extreme Performance pool will use forty of the disks (in eight, five-disk groups), allocate two spare disks, and leave three disks unassigned.
For shared folders, Generic iSCSI storage resources, and VMware or Hyper-V datastores intended for general purpose usage, the Disk Configuration wizard provides the following options:
Star Rating
Disk
RAID
Perf
Capacity
Cost
Three star (best)
SAS
RAID 5(6+1) or RAID 5(4+1)
Medium
High
Medium
Two
NL-SAS
RAID 6(4+2)
Low
High
Low
One
SAS
RAID 10(3+3)
High
Med/Low
Med/High
None
EFD
RAID 5 (4+1)
High
Medium
High
Exchange storage
For storage intended for Exchange Server usage, the Disk Configuration utility provides the following options:
Recommendation
Disk
RAID
Perf
Capacity
Cost
Three star (best)
EFD
RAID 5(4+1)
High
Medium
High
Two star
SAS
RAID 10(3+3)
High
Med/Low
Med/High
One star
SAS
RAID 5(6+1) or RAID 5(4+1)
Medium
High
Medium
None
NL-SAS
RAID 6 (4+2)
Low
High
Low
Backup storage Shared folder and Generic iSCSI
For shared folders and Generic iSCSI storage resources intended for backup storage, the Disk Configuration wizard provides the following options:
Recommendation
Disk
RAID
Perf
Capacity
Cost
Three star (best)
NL-SAS
RAID 6 (4+2)
low
High
Low
Two star
SAS
RAID 5(6+1)
Medium
High
High
One star
SAS
RAID 10(3+3)
High
Med/Low
Med/High
None
EFD
RAID 5(4+1)
High
Medium
High
Database storage Shared folder, Generic iSCSI, VMware, and Hyper-V
For shared folders, Generic iSCSI storage resources, and VMware or Hyper-V data stores intended for database storage, the Disk Configuration wizard provides the following options:
Recommendation
Disk
RAID
Perf
Capacity
Cost
Three star (best)
EFD
RAID 5(4+1)
High
Medium
High
Two star
SAS
RAID 10(3+3)
High
Med/Low
Med/High
One star
SAS
RAID 5(6+1) or RAID 5(4+1)
Medium
High
Medium
None
NL-SAS
RAID 6 (4+2)
Low
High
Low
VM data stores VMware and Hyper-V
For VMware and Hyper-V data stores intended for general purpose usage, the Disk Configuration wizard provides the following options:
Recommendation
Disk
RAID
Perf
Capacity
Cost
Three star (best)
SAS
RAID 5(6+1) or RAID 5(4+1)
Medium
High
Medium
Two star
SAS
RAID 10(3+3)
High
Med/Low
Med/High
One star
EFD
RAID 5(4+1)
High
Medium
High
None
When you choose to automatically configure storage pools on the system, storage disks are assigned to the following pools based on the number and type of available disks:
Pool name
Description
Capacity
Provides storage that maximizes the amount of available storage capacity, but does not provide the same read/write performance as the Performance pool. For example, capacity pool storage may be more appropriate for storing large amounts of data that is primarily static (such as video files, audio files, images, and other types of data) for users and applications that do not have strict performance requirements.
Note: For data that changes or is accessed frequently, the Capacity pool can significantly lower performance, support fewer simultaneous read/operations, and fewer overall users than Performance pool storage.
Performance
Provides the enhanced performance for frequent storage read and write operations (especially for databases and general purpose use) but allows fewer total bytes of storage. For example, performance pool storage may be appropriate for database resources that need to provide quick read/write access times.
Disks are assigned in groups of seven for or five (depending on the platform) and a spare disk is allocated for every thirty disks.
Extreme Performance
Provides the highest performance, but at the highest cost per MB of storage. Flash pool storage is typically more expensive than Performance or Capacity pool storage per MB of storage, but it provides the fastest access times for resources subject to intensive and variable work loads. For example, flash pool storage may be appropriate for central database resources that are accessed through an intranet or LAN.
Disks are assigned in groups of five and a spare disk is allocated for every 30 disks.
When you enable automatic disk configuration, the system allocates existing disks into a Capacity, Performance, and/or Flash pool, depending on the number and type of available disks.
Pool
Disk type
RAID
Allocation
Capacity
NL-SAS
RAID 6 (4+2)
NL SAS disks are allocated in multiples of six in RAID 6 [4+2] groups with no assigned spare disks.
For example if forty-five NL-SAS disks are available, the Capacity pool will use forty-two of the disks (in seven, six-disk groups), will not allocate any spare disks, and will leave three disks unassigned. Spare disks can be assigned manual using the Manually add disks to an existing pool option in the Disk Configuration wizard.
Performance
[VNXe3300]
SAS
RAID 5 (6+1)
SAS disks are assigned in multiples of seven in RAID 5 [6+1] groups. A spare disk is assigned for the first 0-30 disks, and then another spare disk is assigned for each additional group of thirty disks.
For example if forty-five SAS disks are available, the Performance pool will use forty-two of the disks (in six, seven-disk groups), allocate two spare disks, and leave one disk unassigned.
Performance
[VNXe3100]
SAS
RAID 5 (4+1)
SAS disks are assigned in multiples of five in RAID 5 [6+1] groups. A spare disk is assigned for the first 0-30 disks, and then another spare disk is assigned for each additional group of thirty disks.
For example if forty-five SAS disks are available, the Performance pool will use forty disks (in eight, five-disk groups), allocate two spare disks, and leave three disks unassigned.
Extreme Performance
EFD
RAID 5 (4+1)
EFD disks are allocated in multiples of five in RAID 5 [4+1] groups. A spare disk is assigned for the first 0-30 disks, and then another spare disk is assigned for each additional group of thirty disks.
For example if forty-five EFD disks are available, the Extreme Performance pool will use forty of the disks (in eight, five-disk groups), allocate two spare disks, and leave three disks unassigned.
The latest release notes on version 2.1.1.14913 has some help
As of this release, VNXe 3100 supports creating user-defined pools with the
6+1RAID5 profile for SAS drives. To use this profile, you must manually create a
new pool. Automatic disk configuration will continue to use the 4+1RAID5 profile
for SAS drives.
I am guessing that you would not be able to reconfigure the first 5 drives that are also used by the system to store data, So if you had 12 drives, The first 5 drives set up as a raid 4 + 1 that are partially used by the system. The next 7 drives a 6 + 1 raid.
I have a 3100 and 18 SAS drives. I have one performance pool with 3 sets of 4 + 1 raid, I have a hot spare and 2 drives that are just unusable.
brendm
2 Intern
•
313 Posts
264
1
Posted September 29th, 2011 16:00
Hey - The VNXe has very specific templates by which you can configure your storage. That design was intented to make purchasing of additional disks as simple as possible. A few questions:
Do you have SAS or NL-SAS?
On a 3100, SAS drives can either be 4+1 R5, 3+3 R5 while NL-SAS would be 4+2 R6.
How many disks do you have and of what type?