I need to install two ISCSI cards in our VNX5700. It's a production storage. Can I have the steps to do this activity?All my clients have dual path and is installed with power path.
Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "VNX Support Forum".
Seeing that you are adding Ultraflex modules to the SP's (block), this can be performed by the end-user and therefore is publicly available from the following location (UPD):
"SP - Add a storage processor (SP) Ultraflex I/O module"
As you will soon read, after validating the environment ("Before you begin") and of course making sure to wear your ESD wriststrap , it basically involves following the appropriate wizard within USM (reboots each SP one at a time). Also, even though with the VNX 5700, the available slots and possible Ultraflex module combinations are high (I'm assuming when you mention 2 cards it is 1 per SP of course), but as a reminder confirm also that you remain compliant to the maximum port/module count per SP as listed in the document. Then again, it is safe to assume that it was reviewed prior to the purchase of course, but worth mentioning again.
Also note that if you install it you will not be able to take it back without DU. We had the similar problem, customer tested iscsi and after that could not take it out without shutting down both SP (indeed it is possible, but vnx will show critical alert "missing module")
christopher_ime
6 Operator
•
1962 Posts
397
0
Posted January 14th, 2014 22:00
Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "VNX Support Forum".
VNX Support Forum
Seeing that you are adding Ultraflex modules to the SP's (block), this can be performed by the end-user and therefore is publicly available from the following location (UPD):
https://mydocs.emc.com/VNX
1) Under VNX tasks, select: "Add VNX hardware"
2) Select model and storage type
3) You are interested in the following procedure:
"SP - Add a storage processor (SP) Ultraflex I/O module"
As you will soon read, after validating the environment ("Before you begin") and of course making sure to wear your ESD wriststrap
, it basically involves following the appropriate wizard within USM (reboots each SP one at a time). Also, even though with the VNX 5700, the available slots and possible Ultraflex module combinations are high (I'm assuming when you mention 2 cards it is 1 per SP of course), but as a reminder confirm also that you remain compliant to the maximum port/module count per SP as listed in the document. Then again, it is safe to assume that it was reviewed prior to the purchase of course, but worth mentioning again.