
UNSOLVED
G
Gaganpreet_4255
1 Rookie
•
24 Posts
0
3070
January 29th, 2015 00:00
How to verify Time Service configuration in VNX?
Hi,
Please can you share the procedure to verify Time Service Configuration in Vnx........
Thanks & Regards
Gaganpreet Singh
+91-703200425
Responses (2)
Solutions (0)
Anonymous User
457 Posts
2486
0
Posted January 29th, 2015 03:00
Reply

brettesinclair
2 Intern
•
715 Posts
2486
0
Posted January 29th, 2015 03:00
Define your NTP servers in Unisphere by going to the Domains tab in the Home screen, then "Configure NTP".
Check/add/remove servers as required and apply the changes.
Verify config from Control Station using;
nas_cs -info
Datamover ntp is configured separately, from System - Hardware - Datamovers.
Verify sync across datamovers and CS with server_date ALL; date
(note that standby dm will have incorrect time as it can't be configured, but will get config from primary if failed over to)