UNSOLVED

smarti2

updated

13 years ago

S

smarti2

214 Posts

0

2967

December 4th, 2013 09:00

How to reset the VNX Management port back to 1000Mbps

A bug has caused my customers SPA management port to be configured at 10Mbps as per this KB article.

Article Number:000172190 Version:4


Setting SP name from Unisphere forces interface to 10Mbps.


But the workaround does not fix the issue, it's more a workaround to stop it happening.


Does anyone from have the fix to set the interface back to 1000Mbps?


I have tried form command line using naviseccli networkadmin -set -speed auto but it comes back with Unable to execute the command. Invalid port speed: 0xFC


The article says a fix is due out in First quarter 2014 but is there something I can do in the mean time?


Thanks in advance.

  • 33ghem

    1 Message

    818

    0

    Posted December 17th, 2013 06:00

    Hi,

    Could you please provide me the direct link to the article please?

    I cannot find it in my searches.

    Regards,

    Gilles

  • smarti2

    214 Posts

    818

    0

    Posted December 18th, 2013 05:00

    here is the link.

    https://support.emc.com/kb/17219 It may only be available to EMC partners and employees. In the end we had to get 2nd line EMC support to login and reset the speed.

  • shofmannn

    1 Rookie

    •

    104 Posts

    818

    0

    Posted December 19th, 2013 00:00

  • shofmannn

    1 Rookie

    •

    104 Posts

    818

    0

    Posted December 19th, 2013 00:00

    As i read the article i mention there is NO way to change it back from 10 to 1000 or auto. The Workaround you are talking about is how to change the SP Name without geting in this trouble. But you are running already on 10 Mbps so you have to wait until its fixed.

  • lbseraph

    1 Rookie

    •

    53 Posts

    818

    0

    Posted January 31st, 2014 22:00

    Can try below workaround:

    1. Access SPA Remotely Anywhere firstly, then run fbecli in a CMD window.

    2. Issue command "cmp -auto on" from the fbecli command prompt, then enter quit or Ctrl + C keys to exit fbecli.

    3. Check the SPA management port speed again.

  • GearoidG

    251 Posts

    818

    0

    Posted February 1st, 2014 01:00

    The procedure referenced by Ibseraph is a service only procedure and should not be carried out by a customer only in conjunction with a EMC/Partner should this procedure be followed. Any customer who experiences this issue should open an SR with EMC to get it addressed. Also this issue is addressed in later code

    Gearoid