UNSOLVED

HealthyCamper

updated

13 years ago

0

102044

March 6th, 2014 18:00

Venue 11 Pro - Legacy PXE Boot in Dell Docking Station - Keyboard and mouse not working

Using a DELL Venue Pro 7130 BIOS A10 in legacy BIOS mode with a DELL K10A docking station

My problem is that when doing a PXE boot, I cannot respond with an F12 to continue the boot message as the keyboard (whether plugged into the docking station or the tablet itself) is non-functional at this point and when picking the Boot WIM.

Prior to that point (or post if I set WDS 2012R2 to automatically force a PXE boot) the keyboard and mouse come right again.

  • 1598

    0

    Posted March 21st, 2014 08:00

    (Sorry if you saw this hoping it was an answer)

    I believe I'm experiencing exactly the same issue, and I'm on the verge of sending these 2 tablets and docks back.

    After wasting time having to swap monitors about for one with a free DisplayPort connection because neither a simple DisplayPort to VGA and/or DisplayPort to DVI adapter would work (despite working absolutely fine on Lenovos), I then had the fun of trying to get this stupid thing to do a simple PXE boot.

    I EVENTUALLY got it to see our Altiris PXE boot prompt. We have a 2 second countdown where you need to press a function key to select the PXE disk you want. And there I ran into the exact same problem as above.

    The USB keyboard isn't mounted at this point (I can hammer CAPS lock till I'm blue in the face and the LED never lights up), so I can't select our boot media.

    I've checked the BIOS version - I'm on A10.

    I've set the Fastboot to "thorough"

    I've put a system password on (that was one suggestion to force the tablet to mount a keyboard at preboot).

    I've tried switching between UEFI and Legacy.

    Nothing works.

    I saw a mention that BIOS revision A11 "may" fix this problem. Is this going to be available soon? Otherwise, this tablet is going back, and I'll look at alternate manufacturers.

  • 1598

    0

    Posted March 23rd, 2014 14:00

    No problem when using UEFI boot on same device - fortunately this is my preferred deployment method, just hadn't got the IP helpers setup. What's annoying is that every new bit of kit I have had from DELL, (XPS 2720, Venue Pro 11 and Latitude ST2) that I have chosen for use have given me issues with Windows 8.1 and drivers when using MDT and WDS - not sure it's a DELL issue as opposed to an Intel one but feeling very twitchy about DELL right now..
  • boggessc1

    1 Message

    1598

    0

    Posted June 20th, 2014 09:00

    I had just read in another post that if you disable the USB 3.0 in the BIOS that this should resolve the issue. Give it a shot
  • 1598

    0

    Posted September 30th, 2014 03:00

    Nope, I'm afraid it didn't work. Thanks for taking the time to put forward the suggestion, though.

    Latest A13 BIOS and Touch firmware update applied in the fleeting hope that Dell had addressed the issue by now. Alas, no.

     

    USB keyboard directly into Venue.

    Power up password enabled (someone had suggested that as a fix).

    Keyboard responds fine at power up password, then goes completely dead after that until the OS has loaded, meaning I can't press the necessary function key. I can hammer the NUM or CAPS lock keys until I'm blue in the face - the keyboard never responds until the OS has kicked in.

    I'm resigning myself to the fact that I should/could make up a USB boot disk, but the point is WHY SHOULD I? How difficult can it be for DELL to fix this tiny yet highly relevant issue?

    It should not be this difficult.

    (And... Breathe)

     

  • 1600

    0

    Posted September 30th, 2014 06:00

    Hi, there..

    Sorry - I perhaps didn't explain fully.

    I can get the Venue to PXE. With our Altiris system, it downloads a tiny PXE file on first boot where it initially checks in to see if there's anything to do. If there is, it'll download the proper PXE boot disk (WinPE), and go do whatever it's been told to do.

    If there's nothing scheduled for it, then you get a small countdown where you can press a particular key combination to select a boot disk yourself.

    My issue is that I'm getting the initial "tiny" PXE bit where it checks in for something to do. However, because the keyboard is disabled I can't use the key combination to initiate a boot disk.

     

    So even if I select PXE manually, it still has the keyboard disabled so I can't trigger a boot disk.

    (Hope that makes sense?)

     

    Regards,

    Gerard

     

  • Jason10111

    13 Posts

    1600

    0

    Posted September 30th, 2014 06:00

    Have you tried hitting the volume up bottom when you first turn it on? this allows you select the PXE environment rather than having to hit F12 to do it

  • Jason10111

    13 Posts

    1600

    0

    Posted September 30th, 2014 06:00

    Sounds exactly how we do things, but we use LANDESK.

    I understand where you are having issues, for landesk we hit F8 to pick what PXE menu item we use and then it loads the boot.wim file.

    Have you by chance upgraded to bios A13 as well as pulled down the new PXE update?

    Pulling straws but might be quicker for the time being to just make a boot media to skip that part. 

  • 1600

    0

    Posted September 30th, 2014 06:00

    Hi, Jason..

    Yep, I'm on A13.

    I'm slowly resigning myself to making up a boot media.

    Am I ever glad my recommendation of not getting 100 of these things for our first phase was listened to!! :)

     

    Regards,

    Gerard

     

  • 421

    0

    Posted September 30th, 2014 07:00

    Seriously?!

    So with that in place, you're able to press your function key to select your PXE boot disk?

    So I guess I need a powered USB hub and a USB to Ethernet adapter.

    I thought (going by the documentation I could find) that it had to be a super-special chipset (ASIX AX88772). Annoyingly, the 2 places we buy hardware from don't list whether the adapters they sell have this chipset.  
  • Jason10111

    13 Posts

    1600

    0

    Posted September 30th, 2014 07:00

    Just pulled my test 7130 out. Interesting find.

    In the dock, couldn't get KB to work. Out of the dock paired with a usb hub, usb to ethernet adapter and usb keyboard I was able to get it to work fine.

    Sounds like something's going on with the A01 dock that isn't passing the KB through.