
UNSOLVED
Dell Venue Pro 8 - Connected MyPassport Ultra (sort of)
Ok, so it was driving me crazy that I couldn't connect my Venue pro 8 to an external USB HDD; in this case a MyPassport Ultra 1TB HDD.
But I found a solution, well, a workaround anyway.
My plan was to order a Y cable and remove the 5V dc pin (pin 1) from one of the USB cables, then power the unit off a USB charger while still using the data function on the VP8. If the VP8 sees power on the USB port it will go into charging mode and not enable data.
But as it turn out, for some reason the Y cable just worked. I used this one: http://www.amazon.com/gp/product/B005M0ICG2/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1
I connected the micro usb3 port to the passport, the thick cable connector to a usb 3 hub, and the thin wire connector to external power. It worked. Why, I don't know. It's possible the voltage is low enough that the VP8 didn't recognize it and left data functions on. Who knows, it does work though.
Not ideal since I need external power to run the hdd, but I have a monster battery pack if I need it, and I only connect it to transfer movies or tv shows and do backups. I won't use it all the time.
It still stinks the VP8 doesn't put out enough power for a HDD or DVD, but at least its a workaround.
Responses (0)
Solutions (0)
