I have a new PE2650. I have installed IT Assistant on that server as well as another Dell Server (PE4400). ITA has a category for RACs, but does not detect the RAC on my PE2650. Should it?
For the ERA to be detected properly in IT Assistant, you need to install the drivers. They are included in Dell Open Manage Server Administrator. In IT Assistant under the Hardware Profile - Summary Tab, the ERA is not listed at the bottom like the older DRACII cards were. It is listed under the Status tab.
Message Edited by DELL-Carrie on 02-04-2004 09:20 AM
Carrie, Thanks for the response. Although I don't think I understand where to install the drivers. On the server there is not a device without proper drivers. I do have a device called RAC Virtual UART Port, PCI Function 0 and PCI Function 2....all these devices already show DELL Drivers.
When I look at ITA HOME, I see a category call RAC, nothing is listed.
When I look at ITA and select the server that has an embedded RAC, I do see an item listed as ERA. I expected it to show up in the category called RAC.
Carrie_1
2 Intern
•
188 Posts
299
0
Posted February 4th, 2004 13:00
For the ERA to be detected properly in IT Assistant, you need to install the drivers. They are included in Dell Open Manage Server Administrator.
In IT Assistant under the Hardware Profile - Summary Tab, the ERA is not listed at the bottom like the older DRACII cards were. It is listed under the Status tab.
Message Edited by DELL-Carrie on 02-04-2004 09:20 AM