
UNSOLVED
N
NoelleMiltonVeg
4 Posts
0
516
February 6th, 2007 09:00
Help interpreting output of: "symconfigure list -v -freespace -units MB"
Hello:
Following this output, I will pose my question:
========================================
symconfigure list -sid 0372 -v -freespace -units MB
Symmetrix ID: 000185700372
Emulation Formatted Unformatted
(MB) (MB)
--------------------- --------- -------------
FBA 173351 0
CKD-3390 151622 0
========================================
The output of "symdev -noport show" indicates that the only
devices that are not mapped to any FA port are a bunch of
3MB gatekeepers and one 8GB BCV. Fair enough.
So I turned to the
"symconfigure list -sid 0372 -v -freespace -units MB"
to get more/different information.
Ignoring the CKD-339 info since I am interested in the
openSystems space, How do I interpret these numbers
"FBA 173351 0"?
(1) In others words, how much is actually free?
(2) Is that raw?
(3) I know ECC very well, but Im not sure what command to
particularly use to map this free space above back to physical
disks or hypervolumes.
Anyone know the answer to these questions.
Appreciate it.
Noelle Milton
Following this output, I will pose my question:
========================================
symconfigure list -sid 0372 -v -freespace -units MB
Symmetrix ID: 000185700372
Emulation Formatted Unformatted
(MB) (MB)
--------------------- --------- -------------
FBA 173351 0
CKD-3390 151622 0
========================================
The output of "symdev -noport show" indicates that the only
devices that are not mapped to any FA port are a bunch of
3MB gatekeepers and one 8GB BCV. Fair enough.
So I turned to the
"symconfigure list -sid 0372 -v -freespace -units MB"
to get more/different information.
Ignoring the CKD-339 info since I am interested in the
openSystems space, How do I interpret these numbers
"FBA 173351 0"?
(1) In others words, how much is actually free?
(2) Is that raw?
(3) I know ECC very well, but Im not sure what command to
particularly use to map this free space above back to physical
disks or hypervolumes.
Anyone know the answer to these questions.
Appreciate it.
Noelle Milton
Responses (1)
Solutions (0)

SanSavvy
10 Posts
198
0
Posted February 19th, 2007 08:00
As per my understanding, the o/p which you see is the unconfigured capacity.
The o/p 173351 shows the unformatted space in MB.
Its raw space and the way to go about mapping these space is first to create the
configurable devices with desired RAID on it and then to assign that device by mapping and masking as its being done regularly - like symm device allocation to host.
Any comments on above are most welcome.
Cheers.