UNSOLVED

benpunter

updated

19 years ago

B

benpunter

1 Message

0

22060

May 4th, 2008 11:00

Reboot, New Hard Drive & Window Vista - Inspiron 1525

Inspirion 1525 laptop, with windows vista Home

- stopped working, dell sent over a new 160gb hard drive

 

Hard drive is now in, new to reboot and need to re-install windows vista

 I press "power" it says:

 

No boot sector on internal Hard Drive

 

No bootable devices--

strike F1 to retry ("does;nt work")

F2 is set-up utlity ("Hard drive is detected")   

Press f5 to run onboard diagnosotics ("this appears to do nothing")

 

Help,

 

 

  • ah1f

    146 Posts

    373

    0

    Posted May 4th, 2008 12:00

    The first thing to do is patition the new drive then install the "Media Direct", then install the OS. When patitioning you must to decide wether to install the recovery partion or not, it's usualy about 10gb.

     

    In order for Media Direct to work the Dell Quickset must me installed. If Media Direct is not installed and the button is pushed the HD can lose track of the boot sector.

  • bacillus

    2 Intern

    •

    14378 Posts

    373

    0

    Posted May 4th, 2008 12:00

    you need to boot from the vista dvd by pressing F12 at startup with the dvd in the drive to enter vista setup.

    before you start you will need to have the sata driver available on usb memory key or on a floppy if you have an usb floppy. the driver is available from  . you decompress the file and copy the contents to your usb key or floppy.

     

    Additionally you should have the rest of your hardware drivers available for after the operating system install.

    http://support.dell.com/support/downloads/driverslist.aspx?c=us&l=en&s=gen&ServiceTag=&SystemID=INS_PNT_PM_1525&os=WLH&osl=en&catid=&impid=

     

  • bacillus

    2 Intern

    •

    14378 Posts

    373

    0

    Posted May 4th, 2008 13:00

    good point mate!

    I forgot about mediadirect...
  • The_Snowman

    14 Posts

    373

    0

    Posted May 5th, 2008 05:00

    ~~~Instructions~~~

    NOTE: Please follow these word for word and, should you encounter a problem, review the steps. 99% of problems experienced are a result of someone not reading this carefully and fixed only after a certain step is brought to their attention.

    AHCI Concerns: On new Dell systems, they are set up to run in AHCI mode which will give you a 15% system performance boost. In many instances, the AHCI driver MUST be installed during the initial installation process for the installation to work. Those not installing it are finding that their system may BSOD or hang during the installation and saying "Completing Installation Process". One must find the driver specific to their system either on the drivers disk that came with their laptop or at  Dell.com in the drivers section. Download and expand it to a USB drive or disk; the USB is prefered but it is important that you expand it on the media you just saved it to. Once done, put it aside for now.

    1. Place MediaDirect 3.3 in drive;
    2. Restart/Hit F12 at initial screen/One time boot/Boot Dvd;
    3. Follow instructions to change your partitions. This will delete everything. (Note, I got my system to accept two partitions which are the 3Gb MediaDirect partition and the main partition but sometimes you will have no choice but to go with 3;
    4. When it says, remove MD3 disk and replace with your Vista disk;
    5. Restart/hit F12 at initial screen/one time boot/Boot DVD;
    6. When "press any key when ready" comes up make sure you press this right away. On mine, if you dont in the first few seconds there will be no reaction;
    7. Follow the instructions/select complete install and, in the select partition screen, click bottom left to install the AHCI driver, insert the driver medium and direct it to the file which will say AHCI. There may be two files identified, ensure you select the AHCI driver. Once you have completed installing the driver, select correct partition to install Vista on;
    8. On completion and windows is running, reinsert MediaDirect 3;
    9. Run "DellKit" and press enter to complete installation of MediaDirect;
    10. Change disk to your 'Drivers and Utilities' Disk and install 'Dell Resource Application;
    11. Let it open and press extract for all that are checked. Install them. (note: Dont reboot after each installation of appropriate driver or it will take forever.);
    12. Look at the unchecked drivers carefully. NOTE: There are a few that may be unchecked that are on your system. For example, my fingerprint reader doesnt come up checked as well as Quikset but they are there; and
    13. Go to the Dell website/support/drivers and downloads and enter your service tag. Look for drivers that arent on your disk. I am aware that there are a few such as a DVD update.~~~Instructions~~~ NOTE: Please follow these word for word and, should you encounter a problem, review the steps. 99% of problems experienced are a result of someone not reading this carefully and fixed only after a certain step is brought to their attention. AHCI Concerns: On new Dell systems, they are set up to run in AHCI mode which will give you a 15% system performance boost. In many instances, the AHCI driver MUST be installed during the initial installation process for the installation to work. Those not installing it are finding that their system may BSOD or hang during the installation and saying "Completing Installation Process". One must find the driver specific to their system either on the drivers disk that came with their laptop or at www.Dell.com in the drivers section. Download and expand it to a USB drive or disk; the USB is prefered but it is important that you expand it on the media you just saved it to. Once done, put it aside for now. Place MediaDirect 3.3 in drive; Restart/Hit F12 at initial screen/One time boot/Boot Dvd; Follow instructions to change your partitions. This will delete everything. (Note, I got my system to accept two partitions which are the 3Gb MediaDirect partition and the main partition but sometimes you will have no choice but to go with 3; When it says, remove MD3 disk and replace with your Vista disk; Restart/hit F12 at initial screen/one time boot/Boot DVD; When "press any key when ready" comes up make sure you press this right away. On mine, if you dont in the first few seconds there will be no reaction; Follow the instructions/select complete install and, in the select partition screen, click bottom left to install the AHCI driver, insert the driver medium and direct it to the file which will say AHCI. There may be two files identified, ensure you select the AHCI driver. Once you have completed installing the driver, select correct partition to install Vista on; On completion and windows is running, reinsert MediaDirect 3; Run "DellKit" and press enter to complete installation of MediaDirect; Change disk to your 'Drivers and Utilities' Disk and install 'Dell Resource Application; Let it open and press extract for all that are checked. Install them. (note: Dont reboot after each installation of appropriate driver or it will take forever.); Look at the unchecked drivers carefully. NOTE: There are a few that may be unchecked that are on your system. For example, my fingerprint reader doesnt come up checked as well as Quikset but they are there; and Go to the Dell website/support/drivers and downloads and enter your service tag. Look for drivers that arent on your disk. I am aware that there are a few such as a DVD update.

    COURTESY OF THE  Notebook Review Forum