UNSOLVED

anuraj1

updated

18 years ago

A

anuraj1

97 Posts

0

3392

August 12th, 2008 20:00

Possible head crash followed by seek failure on replacement HDD

I recently started hearing a buzzing sound coming from my Dimension 8300. I assumed that one of the cooling fans was having trouble because of dust build up. Soon, something started clicking in my computer as well, and then finally my computer told me there was a seek failure on drive 0. I removed my 250 GB ATA hard drive (a maxtor maxline plus II) and the sounds went away. I think that it may have suffered a head crash. Here's where I could use some help from you guys...

 

I took an old hard drive out of my old Dell Precision 220 and put it in my Dimension 8300, set the BIOS to "auto" under drive options>IDE, and proceeded with startup. It STILL says seek failure on drive 0. Could it be a cable problem? Maybe my IDE controller is messed up? Anyway, I put the HDD back into the Precision 220, and tried starting it up (it hasn't been on in years). It immediately turns itself on as soon as it is plugged in, but the monitor remains black and the light on the monitor stays amber.

 

So to break it down, my problems are:

 

1. Seek failure on ANY HDD on Dimension 8300

 

2. Precision turns right on to black screen.

 

Any input would be greatly appreciated. Thanks!

No Responses