UNSOLVED

bomo

updated

18 years ago

B

bomo

3 Posts

0

3453

September 9th, 2008 02:00

Installing new Hard Drive: Bios can see it, but WinXP installer can't | Dimension 8400 | WinXP

I usually leave my machine running all the time, but I recently left for a trip and shut everything down and unplugged it all.  When I came back, the machine went straight to BSOD.  I ran some tests and it looked like my master HD was dead, so I put in a new HD.  So far so good (except for the part where the machine is hosed, though I do run backups all the time, so my data is safe.)

 

So I inserted the WinXP cd to reinstall, and when it got to the part where I usually re-format the drive, it said it couldn't find any drives (though there should be two of them).  I checked in the BIOS, and BIOS can see both drives.  I ran the hard drive diagnostics from the boot device menu (after pressing f12 during startup) and it gave both drives a "pass."

 

Any reason BIOS could see the drives, but WinXP installer can't?

 

Thanks in advance!

  • bomo

    3 Posts

    322

    0

    Posted September 9th, 2008 02:00

    A follow-up: I've been reading about similar issues around the interwebs, and after looking at the capacitors on the motherboard, there are several of them that are swollen and one is actually leaking a bit.

     

    So: any ideas of where to get decent replacement motherboards?

     

    Thanks again!

  • shesagordie

    12 Elder

    •

    46017 Posts

    322

    0

    Posted September 9th, 2008 04:00

    bomo

    You can either call, Dell Spare Parts here, or buy a Dell OEM 8400 motherboard from here @ $149.99 Free S&H.

    Bev.


    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.
  • 322

    0

    Posted September 10th, 2008 00:00

    Are you using a RAID controller?