I have a Dimension 8400 that came with one SATA hard drive, a DVD-ROM drive and a DVD-RW drive. I added a second SATA hard drive and then proceeded to partition and format the hard drive with the Disk Management of Windows XP (All Programs - Administrative Tools - Computer Management - Disk Management). When I was asked to assign a drive letter Windows suggested F: (C: was the old hard drive, D: and E: the two DVD drives). I canceled and changed E: to F: and D: to E: so that I could select D: for the second hard drive. After I had formatted the new hard drive I restarted the computer but now the two DVD drives are no longer recognized by the BIOS. They also don't show up in Windows. The two hard drives work fine. I disconnected the new hard drive and reset the BIOS to the default values but I still don't see the DVD drives, neither in the BIOS nor in Windows. What can I do to get the DVD drives back?
Problem solved. I disconnected the two DVD drives, disabled the PATA adapters in the BIOS and shut the computer down. Then I connected the master DVD drive, enabled it in the BIOS and it showed up in Windows. I shut the computer down, connected the slave DVD drive, enabled it in the BIOS and now I had both DVD drives in Windows, plus the original hard drive. I shut the computer down and connected the second hard drive, enabled it in the BIOS and logged on to Windows. I have now both hard drives and both DVD drives.
Good work Fred and thanks for the feedback, may help the next Member that visits.
Best Regards!
God, grant me the senility to forget the people I never liked anyway, the good fortune to run into the ones I do and the eyesight to tell the difference. CD/RW Link
Fred-from-NYC
11 Posts
85
0
Posted March 31st, 2006 04:00