UNSOLVED

seymourgriffith

updated

17 years ago

0

13409

March 1st, 2010 05:00

Dell Studio XPS 435MT - how do I install an IDE DVD drive?

Hi,

Can someone please help me out here, my Dell Studio XPS 435MT (small plasticky black UK version from Oct 2009) is driving me crazy.

1) The top 5.25" drive bay has the Dell supplied DVD-RW.  The second unused bay has a hinged door, but when looking inside the bay it's blocked about 2 inches in by a riveted/welded metal bulkhead, which seems to be part of the frame?!  Is this supposed to be there?  How can the drive bay be used?  Or is it just a fake bay?

2) I want to see if I can replace the Dell supplied SATA DVD-RW drive with an IDE DVD-RW multi-region one.  However even using SATA/IDE data/power converters, the pc either refuses to boot up or the bios doesn't detect it at all.  The IDE drive jumper is set to 'Slave'.  Am I doing something wrong with the jumper?  To which of the motherboard SATA data sockets should the drive be connected?  Is there something else I need to do?

3) Is it at all possible to use the PCI sockets?  They don't seem to be the correct size/shape?

NB I have installed Win XP x64.

Thanks in advance for all helpful replies.

  • osprey4

    6 Operator

    •

    34230 Posts

    300

    0

    Posted March 1st, 2010 12:00

    Hi, seymourgriffiths:

    1) See your service manual for this question.

    2) The way to install an IDE drive is to sell it and buy an SATA drive. :emotion-5: Sorry, but those IDE/SATA converters simply don't work that I have ever seen. You could buy an IDE controller card, but most of them cost more than a new DVD/RW drive! :emotion-2:

    3) Your system has PCI Express slots, as shown in your service manual. 

    <ADMIN NOTE: Broken link has been removed from this post by Dell>

    Yes, obviously, you can use them, but you cannot use an old fashioned PCI card in those slots.

    Good luck with the new system!

  • 300

    0

    Posted March 5th, 2010 06:00

    Hi osprey4,

    Thank you for kindly posting a reply to my enquiry.  My apologies for the lateness of my response, I was unwell.

    I bought the Dell to enable me to play/rip/mix a variety of media from different regions at a much greater speed than my old desktop.  The Dell-supplied DVD-RW appears to be single region only, so I thought about swapping it with one of my old (but equally good) multi-region IDE DVD-RW's.

    I may try a PCI-e card with an IDE socket and see what happens...

    I'll give this whole thing more thought, but I will say I'm disappointed with the fake bay and the PCI-e's, in addition to the fact that replacing the DVD-RW will entail removing the PSU first.  Even the HDD is sideways inside, crazy!

    Thanks again for your kind help, the links and your good wishes.

    All the best!
    seymourgriffths

     

  • osprey4

    6 Operator

    •

    34230 Posts

    300

    0

    Posted March 5th, 2010 12:00

    Glad to help. Hope you're feeling better.

    Regards, Osprey