UNSOLVED

musicmad

updated

18 years ago

M

musicmad

5 Posts

0

3060

June 10th, 2008 10:00

Changing hard drives how ???

Hi,

i'm purchasing a new PC from dell in the next week and i need to find out how to transfare all the data from my old PCs hard drive to my new PCs hard drive. My current PC has two separate hard drives each of 120Gigs = 240Gigs, my new PCs hard drive will also have two separate hard drives this time of 250Gigs x 2 = 500Gigs. i'm assuming i would just burn all the HDD data to disc and then rip that data to the new hard drive, i could be wrong???

This is new for me as this is my first time in the process, could anyone comment on how this is done???

Thanks
Musicmad
Message Edited by musicmad on 06-10-2008 07:04 AM
  • russell_314

    706 Posts

    390

    0

    Posted June 10th, 2008 12:00

    I know they make cables that allow you to transfer your files but I have never used them.  I always use an external hard drive and transfer the files to it then put them on the new PC.  I have less then 100 GB's of music, pics and other files though.

     

     

  • mpo

    2 Intern

    •

    399 Posts

    390

    0

    Posted June 10th, 2008 12:00

    You have two separate questions.

     

    You state your new computer will have two hard drives. If you set up your new hard drives in either RAID 0 or RAID 1, you will only have 250 GB available. If you set up the disks as separate volumes (e.g., C: and D:) you will have 500 GB. Your actual space available in either case will be somewhat less, as formatting, the operating system, and recovery partition will take up some space.

     

    As for transferring data, there are several options:

     

    a) you can use Vista's Tranfer Utility and a special cable to transfer the data between the computers,

    b) if your old system has SATA hard drives and your new system has enough SATA ports on the motherboard, you can connect the drive directly and transfer the data to a new drive,

    c) use an external drive.

    d) if you have a home network, you can copy the files over the network, or,

    e) copy using CDs or DVDs--but you will burn through a bunch of media depending on the amount of data you have.

     

    http://www.microsoft.com/windows/products/windowsvista/buyorupgrade/easytransfer.mspx

     

    I transfered my data using d) the home network.

  • tr4

    1 Rookie

    •

    1727 Posts

    390

    0

    Posted June 10th, 2008 15:00

    Mad, assuming you are using a router, you can just have both pc's plugged in and create a home network, Make the old pc's drives available to the new one and you can copy the files you want and place them where you want. Your only cost may be purchasing another ethernet cable. and if you don't have a router, buy one of those. It does not make sense not for everyone to have one
  • musicmad

    5 Posts

    390

    0

    Posted June 11th, 2008 22:00

    Hi,  
     
    Yes basically its all my sub folders inside the my documents folder that contain all the data that i wish to transfer, 18.9Gb only! How do i go about software programs, is it possible to transfer these as data, or do thay need to be newly installed from disc???  
     
    I'm assuming from my 18.9Gb that it would be better to burn the data to DVD, how is this done???
  • tr4

    1 Rookie

    •

    1727 Posts

    390

    0

    Posted June 12th, 2008 00:00

    Programs would have to be installed. This is for data. with this method no burning required.
  • musicmad

    5 Posts

    390

    0

    Posted June 12th, 2008 16:00

    Thanks guys for all your feedback..  
     
    Cheers  
    Musicmad