Just got my 8400, would like to move all my hd drives from my 4600 into the new machine.
This inculdes a pair of WD raptor 36g (for raid 0 in the new machine) and a pair of seagate 160g sata (for raid 1).
Currently, in the 4600, I have the 2 raptors and 1 seagate 160 (installed in the modified floppy cage) as internal and the other seagate 160 as external via usb 2.0 within its enclosure.
What do I need to pack all these in....
New HD cage to replace the 3.5 floppy cage in the 8400 (the fllopy cage in the 8400 can handle 2 device but is a bit narrow for the 3.5 HD)? Or I have to modify it again with a few rubber washer.
Can the power supply handle it?
Is there any way that I can add an extra coolinig fan to keep this baby cool?
Any advise.....thanks.
Additionally, the system came with DVD and DVDburner (which I am keeping them) but no floopy.
I sure would like to know as well. I am currently running three internal drives (160G, 250G x 2 - though no RAID). I have an external 250G via firewire. I do have one IDE drive & one more 250G SATA drive lying around collecting dust right now.
I just received an email from Dell support. This is what was replied to my question of adding more hard drives to my Dim 8400. This is really terrible. They really should have made it clear to the potential buyer regarding the system's limitation. Also there is no reply on the question of upgrading the power supply to handle more hard drives. I hope to hear from Dell soon regarding this matter & keep you posted.
As per your mail I understand that you want to install three or four internal SATA hard drives in your Dell system. You want to know whether it is possible with the power source that is currently installed and if not, can you upgrade the power supply unit.
Terry, I have verified your Dell system details and confirmed that you can install only upto 2 hard drives. The power supply installed in the system will be able to support two hard drives.
Please do e-mail us if you need any further assistance or information, I will be more than glad to help you resolve the issue.
Thank you for choosing Dell. Respectfully, Ramanjeet S Chawla DT D30842 Dell Technical Support" -----------------------------------------------------------------------------------------
well i currently have an 8400 with the 160 seagate sata in a zalman hdd cooler mounted in the lower 5.25 bay and in the 2 hdd spots are my 36 gb raptors in raid 0 config. been that since the day i recieved the machine almost a month ago and no issues yet.
i would like to upgrade the psu though and pcpowerand cooling's site doesnt have the 8400 listed. anyone know if it needs the adapter or not?
Run 4 hard drives over 24 hours with various test program. The power supply hod up. However, it did generate a bit more heat that's just using 2 hard drives.
Did some really minor modification and that solve the head built up issue.
Took the the 3.5" face plate off and drilled 5 - 3/8 holes on each to allow direct air flow from the front over the memory and CPU. (If look at the back of the face plate, you will see some plastic molding marks where you can align the holes perfectly. Please drill with a 1/16 bit first and go up to 3/8 with increment of 1/16, this will help you to avoid cracking the face plate)
Added an additional PCI slot fan with airflow volume of 24CFM.
All this keep the machine nice and cool.
The only time that the standard exhaust fan kick into the high gear is when the CPU testing program was running - which is normal.
How did you mount the hard drives. It sure would be nice if there is a picture to show how to mount the drives. I have two optical drives & a floppy. Also how did you attach the power supply cables to each of the drives?
TomXPS
1310 Posts
306
0
Posted August 2nd, 2004 22:00