UNSOLVED

SteveP55419

updated

18 years ago

S

SteveP55419

106 Posts

0

10919

January 25th, 2009 10:00

Grinding Noise with 3100cn

Before I start, let me state that Dell should stop 'improving' their website. If it gets any 'better' nobody will be able to use it.

I tried to use the MPF tray on my 3100cn recently and got the error: 'Paper jam. Open reg cover and check MPF'. I opened the back cover to check it and then had a hard time closing it. I tried slamming it and it closed and it now opens and closes smoothly each time. HOWEVER: whenever I start the printer up or use it to print a GRINDING NOISE starts up.

As far as the paper jam issue goes, there is no jam. I researched it and there is a problem with the printer's paper jam sensor. I am OK with not being able to use the MPF tray anymore but the grinding noise worries me.

Thanks for any ideas.

Steve

  • kenc120

    2 Posts

    266

    0

    Posted January 30th, 2011 14:00

    I had the same problem! It turned out to be the MFP feeder mechanism trying to load paper even though I was not using it.

     

    I opened the MFP door, removed the paper and stuck a ruler in the center where the paper feeder tries to grap the paper (looks like a rubber of some kind). pushed it in an rotated it about 30 degrees down and the noise stopped.

     

    <ADMIN NOTE:Email id removed per privacy policy>

  • MartinAMC

    1 Message

    266

    0

    Posted June 5th, 2014 09:00

    Dear Kenc120

    some years later i had the same problem - took me some time to find the right sugession

    i didn't find a ruler so my fingers had to turn the rubber

    You saved my comp. from ordering a new printer - the 3100cn is now running for nine years

    thanks again
    martin