Personally I'd say "keeping the way it is" is the best way, while T5600 is well designed system on fan cooling. Almost all PCIe slots and hard drive bays are occupied in mine, and never experienced any overheat issue. May I know what leads you to the thought of adding extra fans?
I understand your system is great on cooling, its just that I recently upgraded the video card and replaced the thermal paste on the CPUs. I want to help in keeping the system as cool as possible.
It should be fine with your hardware configuration. Take this for example, installed with two GTX 1080 without cooling problem. And this is my T5600 benchmark for your reference. All hard drives including 1x NVMe + 1x m.2 SATA on PCIe slot temperature between 2X and 4X °C, i.e. within healthy range.
However, if you still want to add a third party fan anyway, you may check out this thread for some clues.
thank you, yet the link I provided is part of the setup I want to employ if possible. I would then use a 6 pin male to dual molex and connect the fans that way. I just want to make sure it can be done....
I recommend updating the BIOS to the latest version. In my experience that made the PCI fan default speed a bit higher and should move plenty of air across those PCIe cards in your case. :)
I have the latest BIOS so its alright. And upon further research, brainstorming, and what not, I decided to take a crack at putting a 6 pin pcie male to dual female, connect one female to a male, use the other female to connect the fans with a pcie male to dual molex... I will update with pictures when it is done. -
bmcowboy
4 Apprentice
•
573 Posts
1813
0
Posted March 6th, 2019 18:00
I never saw any PCI fan with 6-pin or 8-pin power socket. Even if they exist, better don't touch it when you don't familiar with their pin allocation.
Again, I still don't recommend a third party PCI fan on T5600.