UNSOLVED

Eslam EL Manakhly

updated

4 years ago

EE

Eslam EL Manakhly

1 Rookie

•

14 Posts

0

1411

January 3rd, 2023 06:00

ML3 LTO8 FC-HH vs FC-FH Tape Drive

Hello Folks, 

I really have a question related to ML3 LTO8 FC-HH vs FC-FH Tape Drive. Since the ML3 supports 3 HH Tape and 2 FH. 

I want to know the difference in specs between the HH and FH and when I can position each one ? 

  • tapelibraryfixer

    2 Intern

    •

    427 Posts

    346

    0

    Posted January 3rd, 2023 08:00

    Full Height LTOs are Faster, not sure theres much else differant

  • DELL-Charles R

    Moderator

    •

    4730 Posts

    •

    25476 Points

    344

    0

    Posted January 3rd, 2023 11:00

    Hello Eslam EL Manakhly,

     

    Dell EMC ML3 Tape Library Field Service Manual Page 18 : https://dell.to/3vB9BCG

     

    *Half-height (HH) tape drives can be installed in any drive bay in a module.

    *Full-height (FH) tape drives must be installed in the lowest two bays of a module. Installing a full-height drive in the top two bays of a module is not supported.

     

    This is to follow up on what tapelibraryfixer mentioned:

    Max Native Backup Rate per Drive

    *LTO-8 (half-height): 300MB/s, 1080GB/hr

    *LTO-8 (full-height): 360MB/s, 1296GB/hr

     

    DELL-Charles R

    Social Media and Communities Professional
    Dell Technologies | Enterprise Support Services
    #IWork4Dell

    Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!