UNSOLVED

Conor McCarthy

updated

15 years ago

0

25021

May 15th, 2012 05:00

Help Please: Error 462 - A SYMbol procedure could not be carried out because the firmware could not allocate sufficient cache memory.

Hello. I am trying to addPhysicalDisks but am getting an error. I have added disks in the past successfully using this command. Can anyone shed some light on what is going on here?
 
 
smcli -n fifteen -p PASS -c "set diskGroup [\"NAME\"] addPhysicalDisks=(1,4 1,5)";
Performing syntax check...

Syntax check complete.

Executing script...

Unable to set disk group "NAME" add physical disks at line 1.
Error 462 - A SYMbol procedure could not be carried out because the firmware could not allocate sufficient cache memory.
The command at line 1 that caused the error is:

set diskGroup ["NAME"] addPhysicalDisks=(1,4 1,5);

Script execution halted due to error.

SMcli failed.
  • DELL-Sam L

    Community Manager

    •

    8147 Posts

    •

    34706 Points

    965

    0

    Posted May 15th, 2012 10:00

    Hello Conor McCarthy,

    There are a couple of things need to know. First is what type of San do you have? & second what is the Firmware of the Controller cards?  Please feel free to reply so we can better assist you with your issue.

  • 965

    0

    Posted May 16th, 2012 02:00

    Hello Sam,

    It's an MD3000 + MD1000 with 07.35.39.64 firmware. I've included full info below:


    PROFILE FOR STORAGE ARRAY: fifteen (Wed May 16 09:14:04 BST 2012) 


    SUMMARY------------------------------

    Number of RAID controller modules: 2


    Number of disk groups: 1

    RAID 6: Enabled


    Total number of virtual disks used: 2
    Number of standard virtual disks: 1
    Number of access virtual disks: 1
    Total number of virtual disks allowed: 256



    Snapshot Virtual Disks: Disabled
    Number of snapshots used: 0
    Number of snapshots allowed: 0
    Number of snapshots allowed per source virtual disk: 0


    Virtual Disk Copy: Disabled
    Number of copies used: 0
    Number of copies allowed: 0


    Number of physical disks: 30
    Mixed physical disk types: Enabled
    Current physical disk type(s): Serial Attached SCSI (SAS) (30)
    Total hot spare physical disks: 2
    Standby: 2
    In use: 0


    Number of expansion enclosures: 1
    Number of expansion enclosures allowed: 2


    Storage Partitioning: Enabled
    Number of partitions used: 1
    Number of partitions allowed: 4
    Number of virtual disks allowed per partition: 256


    Access virtual disk: LUN 31,31,31 (see Mappings section for details)
    Default host OS: Windows Server 2003/Server 2008 Non-Clustered (Host OS index 0)


    Current configuration
    Firmware version: 07.35.39.64
    NVSRAM version: N133X-735890-005
    EMW version: 03.35.G6.45
    AMW version: 03.35.G6.45
    Pending configuration
    Staged firmware download supported: Yes
    Firmware version: None
    NVSRAM version: None
    Transferred on: None
    RAID Controller Module enclosure audible alarm: Disabled


    NVSRAM configured for batteries: Yes

    Start cache flushing at (in percentage): 80
    Stop cache flushing at (in percentage): 80
    Cache block size (in KB): 4

    Media scan frequency (in days): 15

    Failover alert delay (in minutes): 5

    Feature enable identifier: 0000000438BB213300010A1600000004

    Feature pack: Basic
    Feature pack submodel ID: 39

    Storage array world-wide identifier (ID): 6001C23000CB95BB00000000479FA976

    CONTROLLERS------------------------------
    Number of RAID controller modules: 2

    RAID Controller Module in Enclosure 0, Slot 0


    Status: Online

    Current configuration
    Firmware version: 07.35.39.64
    Appware version: 07.35.39.64
    Bootware version: 07.35.39.64
    NVSRAM version: N133X-735890-005
    Pending configuration
    Firmware version: None
    Appware version: None
    Bootware version: None
    NVSRAM version: None
    Transferred on: None
    Replacement part number: Not Available
    Model name: 133X
    Board ID: 1331
    Submodel ID: 39
    Product ID: MD3000
    Revision: 0735
    Replacement part number:
    Part number: 0XR277
    Serial number: 79H000N
    Vendor: DELL
    Date of manufacture: September 20, 2007
    Data Cache
    Total present: 310 MB
    Total used: 310 MB
    Processor cache:
    Total present: 202 MB
    Host Interface Board
    Status: Not Present
    Location: Slot 1
    Type: Unknown
    Number of ports: 0
    Board ID: Not Available
    Replacement part number: Not Available
    Part number: Not Available
    Serial number: Not Available
    Vendor: Not Available
    Date of manufacture: Not available
    Date/Time: Wed May 16 09:14:10 BST 2012

    Associated Virtual Disks (* = Preferred Owner): None


    RAID Controller Module DNS/Network name: target
    Remote login: Enabled*


    Ethernet port: 1
    Link status: Up
    MAC address: 00:1c:23:cb:93:81
    Negotiation mode: Auto-negotiate
    Port speed: 100 Mbps
    Duplex mode: Full duplex
    IPv4 settings: Enabled
    Network configuration: Static
    IP address: 192.168.2.15
    Subnet mask: 255.255.255.0
    Gateway: 192.168.2.15
    IPv6 settings: Enabled
    Auto-configuration: Stateless
    Local IP address: FE80:0000:0000:0000:021C:23FF:FECB:9381

    *NVSRAM setting, may be overridden by DHCP/Bootp server setting


    Physical Disk interface: SAS
    Channel: 1
    Port: Expansion
    Status: Up
    Maximum data rate: 3 Gbps
    Current data rate: 3 Gbps

    Physical Disk interface: SAS
    Channel: 2
    Port: Expansion
    Status: Up
    Maximum data rate: 3 Gbps
    Current data rate: 3 Gbps

    Host interface: Sas
    Channel: 1
    Port: 0, 0
    Status: Up
    World-wide identifier: 50:01:c2:34:cb:93:81:04
    Maximum data rate: 3 Gbps
    Current data rate: 3 Gbps
    Part type: C1068 revision 1,588,992

    RAID Controller Module in Enclosure 0, Slot 1


    Status: Online

    Current configuration
    Firmware version: 07.35.39.64
    Appware version: 07.35.39.64
    Bootware version: 07.35.39.64
    NVSRAM version: N133X-735890-005
    Pending configuration
    Firmware version: None
    Appware version: None
    Bootware version: None
    NVSRAM version: None
    Transferred on: None
    Replacement part number: Not Available
    Model name: 133X
    Board ID: 1331
    Submodel ID: 39
    Product ID: MD3000
    Revision: 0735
    Replacement part number:
    Part number: 0XR277
    Serial number: 79I0044
    Vendor: DELL
    Date of manufacture: September 20, 2007
    Data Cache
    Total present: 310 MB
    Total used: 310 MB
    Processor cache:
    Total present: 202 MB
    Host Interface Board
    Status: Not Present
    Location: Slot 2
    Type: Unknown
    Number of ports: 0
    Board ID: Not Available
    Replacement part number: Not Available
    Part number: Not Available
    Serial number: Not Available
    Vendor: Not Available
    Date of manufacture: Not available
    Date/Time: Wed May 16 09:14:13 BST 2012

    Associated Virtual Disks (* = Preferred Owner):
    fifteen*


    RAID Controller Module DNS/Network name: target
    Remote login: Enabled*


    Ethernet port: 1
    Link status: Up
    MAC address: 00:1c:23:cb:95:bb
    Negotiation mode: Auto-negotiate
    Port speed: 100 Mbps
    Duplex mode: Full duplex
    IPv4 settings: Enabled
    Network configuration: Static
    IP address: 192.168.2.16
    Subnet mask: 255.255.255.0
    Gateway: 192.168.2.16
    IPv6 settings: Enabled
    Auto-configuration: Stateless
    Local IP address: FE80:0000:0000:0000:021C:23FF:FECB:95BB

    *NVSRAM setting, may be overridden by DHCP/Bootp server setting


    Physical Disk interface: SAS
    Channel: 1
    Port: Expansion
    Status: Up
    Maximum data rate: 3 Gbps
    Current data rate: 3 Gbps

    Physical Disk interface: SAS
    Channel: 2
    Port: Expansion
    Status: Up
    Maximum data rate: 3 Gbps
    Current data rate: 3 Gbps

    Host interface: Sas
    Channel: 1
    Port: 0, 0
    Status: Up
    World-wide identifier: 50:01:c2:34:cb:95:bb:04
    Maximum data rate: 3 Gbps
    Current data rate: 3 Gbps
    Part type: C1068 revision 1,588,992

    DISK GROUPS------------------------------

    Number of disk groups: 1


    Name: fifteen

    Status: Optimal

    Capacity 4.63 TB
    RAID level: 5

    Physical Disk type: Serial Attached SCSI (SAS)
    Enclosure loss protection: No

    Current owner: RAID Controller Module in slot 1


    Associated virtual disks and free capacity


    Virtual Disk Capacity
    fifteen 4.604 TB
    Free Capacity 26.567 GB



    Associated physical disks - present (in piece order)


    Enclosure Slot
    0 0
    0 1
    0 2
    0 3
    0 4
    0 5
    0 6
    0 7
    0 8
    0 9
    0 10
    0 11
    0 12
    0 13
    1 0
    1 1
    1 2
    1 3



    STANDARD VIRTUAL DISKS------------------------------

    SUMMARY

    Number of standard virtual disks: 1

    See other Virtual Disks sub-tabs for premium feature information.


    NAME STATUS CAPACITY RAID LEVEL DISK GROUP DRIVE TYPE
    fifteen Optimal 4.604 TB 5 fifteen SAS

    DETAILS


    Virtual Disk name: fifteen

    Virtual Disk status: Optimal

    Capacity: 4.604 TB
    Virtual Disk world-wide identifier: 60:01:c2:30:00:cb:93:81:00:00:16:ad:4b:6f:df:c0
    Subsystem ID (SSID): 0
    Associated disk group: fifteen
    RAID level: 5

    Physical Disk type: Serial Attached SCSI (SAS)
    Enclosure loss protection: No

    Preferred owner: RAID Controller Module in slot 1
    Current owner: RAID Controller Module in slot 1


    Segment size: 128 KB
    Capacity reserved for future segment size changes: Yes
    Maximum future segment size: 2,048 KB
    Modification priority: High


    Read cache: Enabled
    Write cache: Enabled
    Write cache without batteries: Disabled
    Write cache with mirroring: Enabled
    Flush write cache after (in seconds): 10.00
    Dynamic cache read prefetch: Enabled

    Enable background media scan: Enabled
    Media scan with consistency check: Enabled

    Pre-Read consistency check: Disabled

    MISSING VIRTUAL DISKS------------------------------

    Number of missing virtual disks: 0

    DRIVES------------------------------

    SUMMARY
    Number of physical disks: 30
    Current physical disk types: Serial Attached SCSI (SAS) (30)

    BASIC:

    TRAY, SLOT STATUS CAPACITY TYPE CURRENT DATA RATE PRODUCT ID FIRMWARE VERSION
    0, 0 Optimal 279.397 GB SAS 3 Gbps ST3300655SS S52A
    0, 1 Optimal 279.397 GB SAS 3 Gbps ST3300655SS S52A
    0, 2 Optimal 279.397 GB SAS 3 Gbps ST3300655SS S52A
    0, 3 Optimal 279.397 GB SAS 3 Gbps ST3300655SS S52A
    0, 4 Optimal 279.397 GB SAS 3 Gbps ST3300655SS S52A
    0, 5 Optimal 279.397 GB SAS 3 Gbps ST3300657SS ES62
    0, 6 Optimal 279.397 GB SAS 3 Gbps ST3300655SS S515
    0, 7 Optimal 279.397 GB SAS 3 Gbps ST3300655SS S527
    0, 8 Optimal 279.397 GB SAS 3 Gbps ST3300655SS S52A
    0, 9 Optimal 279.397 GB SAS 3 Gbps ST3300655SS S52A
    0, 10 Optimal 279.397 GB SAS 3 Gbps ST3300655SS S52A
    0, 11 Optimal 279.397 GB SAS 3 Gbps ST3300655SS S52A
    0, 12 Optimal 279.397 GB SAS 3 Gbps ST3300655SS S52A
    0, 13 Optimal 279.397 GB SAS 3 Gbps ST3300655SS S52A
    0, 14 Optimal 279.397 GB SAS 3 Gbps HUS156030VLS600 E516
    1, 0 Optimal 279.397 GB SAS 3 Gbps HUS156030VLS600 E516
    1, 1 Optimal 279.397 GB SAS 3 Gbps HUS156030VLS600 E516
    1, 2 Optimal 279.397 GB SAS 3 Gbps HUS156030VLS600 E516
    1, 3 Optimal 279.397 GB SAS 3 Gbps HUS156030VLS600 E516
    1, 4 Optimal 279.397 GB SAS 3 Gbps HUS156030VLS600 E516
    1, 5 Optimal 279.397 GB SAS 3 Gbps HUS156030VLS600 E516
    1, 6 Optimal 279.397 GB SAS 3 Gbps HUS156030VLS600 E516
    1, 7 Optimal 279.397 GB SAS 3 Gbps HUS156030VLS600 E516
    1, 8 Optimal 279.397 GB SAS 3 Gbps HUS156030VLS600 E516
    1, 9 Optimal 279.397 GB SAS 3 Gbps HUS156030VLS600 E516
    1, 10 Optimal 279.397 GB SAS 3 Gbps HUS156030VLS600 E516
    1, 11 Optimal 279.397 GB SAS 3 Gbps HUS156030VLS600 E516
    1, 12 Optimal 279.397 GB SAS 3 Gbps HUS156030VLS600 E516
    1, 13 Optimal 279.397 GB SAS 3 Gbps HUS156030VLS600 E516
    1, 14 Optimal 279.397 GB SAS 3 Gbps HUS156030VLS600 E516

    DRIVE CHANNELS:

    TRAY, SLOT PREFERRED CHANNEL REDUNDANT CHANNEL
    0, 0 1 2
    0, 1 2 1
    0, 2 1 2
    0, 3 2 1
    0, 4 1 2
    0, 5 2 1
    0, 6 1 2
    0, 7 2 1
    0, 8 1 2
    0, 9 2 1
    0, 10 1 2
    0, 11 2 1
    0, 12 1 2
    0, 13 2 1
    0, 14 1 2
    1, 0 1 Physical Disk path redundancy: Lost
    1, 1 1 Physical Disk path redundancy: Lost
    1, 2 1 Physical Disk path redundancy: Lost
    1, 3 1 Physical Disk path redundancy: Lost
    1, 4 1 Physical Disk path redundancy: Lost
    1, 5 1 Physical Disk path redundancy: Lost
    1, 6 1 Physical Disk path redundancy: Lost
    1, 7 1 Physical Disk path redundancy: Lost
    1, 8 1 Physical Disk path redundancy: Lost
    1, 9 1 Physical Disk path redundancy: Lost
    1, 10 1 Physical Disk path redundancy: Lost
    1, 11 1 Physical Disk path redundancy: Lost
    1, 12 1 Physical Disk path redundancy: Lost
    1, 13 1 Physical Disk path redundancy: Lost
    1, 14 1 Physical Disk path redundancy: Lost


    HOT SPARE COVERAGE:
    The following disk groups are not protected: None - All disk groups are protected
    Total hot spare physical disks: 2

    Standby: 2
    In use: 0

    Standby physical disk at enclosure 1, slot 14 (SAS, 279.397 GB)
    Protects the following disk groups: fifteen

    Standby physical disk at enclosure 0, slot 14 (SAS, 279.397 GB)
    Protects the following disk groups: fifteen


    DETAILS
    Physical Disk at Enclosure 0, Slot 0


    Status: Optimal

    Mode: Assigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:c5:00:07:d9:df:0b:00:00:00:00:00:00:00:00
    Associated disk group: fifteen




    Physical Disk path redundancy: OK
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,015 RPM
    Current data rate: 3 Gbps
    Product ID: ST3300655SS
    Firmware version: S52A
    Serial number: 3LM39K7P
    Vendor: SEAGATE
    Date of manufacture: February 14, 2008

    Physical Disk at Enclosure 0, Slot 1


    Status: Optimal

    Mode: Assigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:c5:00:07:d9:f6:7b:00:00:00:00:00:00:00:00
    Associated disk group: fifteen




    Physical Disk path redundancy: OK
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,015 RPM
    Current data rate: 3 Gbps
    Product ID: ST3300655SS
    Firmware version: S52A
    Serial number: 3LM39ZGN
    Vendor: SEAGATE
    Date of manufacture: February 14, 2008

    Physical Disk at Enclosure 0, Slot 2


    Status: Optimal

    Mode: Assigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:c5:00:07:d9:e4:0b:00:00:00:00:00:00:00:00
    Associated disk group: fifteen




    Physical Disk path redundancy: OK
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,015 RPM
    Current data rate: 3 Gbps
    Product ID: ST3300655SS
    Firmware version: S52A
    Serial number: 3LM3A21V
    Vendor: SEAGATE
    Date of manufacture: February 14, 2008

    Physical Disk at Enclosure 0, Slot 3


    Status: Optimal

    Mode: Assigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:c5:00:07:d9:fd:c3:00:00:00:00:00:00:00:00
    Associated disk group: fifteen




    Physical Disk path redundancy: OK
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,015 RPM
    Current data rate: 3 Gbps
    Product ID: ST3300655SS
    Firmware version: S52A
    Serial number: 3LM39KFD
    Vendor: SEAGATE
    Date of manufacture: February 14, 2008

    Physical Disk at Enclosure 0, Slot 4


    Status: Optimal

    Mode: Assigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:c5:00:07:d7:c9:9b:00:00:00:00:00:00:00:00
    Associated disk group: fifteen




    Physical Disk path redundancy: OK
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,015 RPM
    Current data rate: 3 Gbps
    Product ID: ST3300655SS
    Firmware version: S52A
    Serial number: 3LM30EFP
    Vendor: SEAGATE
    Date of manufacture: February 12, 2008

    Physical Disk at Enclosure 0, Slot 5


    Status: Optimal

    Mode: Assigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:c5:00:09:75:b3:77:00:00:00:00:00:00:00:00
    Associated disk group: fifteen




    Physical Disk path redundancy: OK
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,015 RPM
    Current data rate: 3 Gbps
    Product ID: ST3300657SS
    Firmware version: ES62
    Serial number: 3SJ1DXDQ
    Vendor: SEAGATE
    Date of manufacture: June 23, 2010

    Physical Disk at Enclosure 0, Slot 6


    Status: Optimal

    Mode: Assigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:c5:00:04:8d:e1:af:00:00:00:00:00:00:00:00
    Associated disk group: fifteen




    Physical Disk path redundancy: OK
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,015 RPM
    Current data rate: 3 Gbps
    Product ID: ST3300655SS
    Firmware version: S515
    Serial number: 3LM1PBPW
    Vendor: SEAGATE
    Date of manufacture: September 15, 2007

    Physical Disk at Enclosure 0, Slot 7


    Status: Optimal

    Mode: Assigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:c5:00:07:d9:f7:cf:00:00:00:00:00:00:00:00
    Associated disk group: fifteen




    Physical Disk path redundancy: OK
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,015 RPM
    Current data rate: 3 Gbps
    Product ID: ST3300655SS
    Firmware version: S527
    Serial number: 3LM39ZK9
    Vendor: SEAGATE
    Date of manufacture: February 14, 2008

    Physical Disk at Enclosure 0, Slot 8


    Status: Optimal

    Mode: Assigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:c5:00:07:d9:e5:ff:00:00:00:00:00:00:00:00
    Associated disk group: fifteen




    Physical Disk path redundancy: OK
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,015 RPM
    Current data rate: 3 Gbps
    Product ID: ST3300655SS
    Firmware version: S52A
    Serial number: 3LM3A0AH
    Vendor: SEAGATE
    Date of manufacture: February 14, 2008

    Physical Disk at Enclosure 0, Slot 9


    Status: Optimal

    Mode: Assigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:c5:00:07:d9:e6:4f:00:00:00:00:00:00:00:00
    Associated disk group: fifteen




    Physical Disk path redundancy: OK
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,015 RPM
    Current data rate: 3 Gbps
    Product ID: ST3300655SS
    Firmware version: S52A
    Serial number: 3LM3A0CY
    Vendor: SEAGATE
    Date of manufacture: February 14, 2008

    Physical Disk at Enclosure 0, Slot 10


    Status: Optimal

    Mode: Assigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:c5:00:07:d9:fb:bf:00:00:00:00:00:00:00:00
    Associated disk group: fifteen




    Physical Disk path redundancy: OK
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,015 RPM
    Current data rate: 3 Gbps
    Product ID: ST3300655SS
    Firmware version: S52A
    Serial number: 3LM39K3J
    Vendor: SEAGATE
    Date of manufacture: February 15, 2008

    Physical Disk at Enclosure 0, Slot 11


    Status: Optimal

    Mode: Assigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:c5:00:07:d9:f4:f7:00:00:00:00:00:00:00:00
    Associated disk group: fifteen




    Physical Disk path redundancy: OK
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,015 RPM
    Current data rate: 3 Gbps
    Product ID: ST3300655SS
    Firmware version: S52A
    Serial number: 3LM3A14S
    Vendor: SEAGATE
    Date of manufacture: February 14, 2008

    Physical Disk at Enclosure 0, Slot 12


    Status: Optimal

    Mode: Assigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:c5:00:07:d7:c9:33:00:00:00:00:00:00:00:00
    Associated disk group: fifteen




    Physical Disk path redundancy: OK
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,015 RPM
    Current data rate: 3 Gbps
    Product ID: ST3300655SS
    Firmware version: S52A
    Serial number: 3LM30EDN
    Vendor: SEAGATE
    Date of manufacture: February 10, 2008

    Physical Disk at Enclosure 0, Slot 13


    Status: Optimal

    Mode: Assigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:c5:00:07:d9:fa:db:00:00:00:00:00:00:00:00
    Associated disk group: fifteen




    Physical Disk path redundancy: OK
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,015 RPM
    Current data rate: 3 Gbps
    Product ID: ST3300655SS
    Firmware version: S52A
    Serial number: 3LM38Q6A
    Vendor: SEAGATE
    Date of manufacture: February 15, 2008

    Physical Disk at Enclosure 0, Slot 14


    Status: Optimal

    Mode: Hot spare standby
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:cc:a0:1f:7a:b4:48:00:00:00:00:00:00:00:00
    Associated disk group: None




    Physical Disk path redundancy: OK
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,030 RPM
    Current data rate: 3 Gbps
    Product ID: HUS156030VLS600
    Firmware version: E516
    Serial number: J0X5GZ5N
    Vendor: HITACHI
    Date of manufacture: Not Available

    Physical Disk at Enclosure 1, Slot 0


    Status: Optimal

    Mode: Assigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:cc:a0:0f:4c:5c:d8:00:00:00:00:00:00:00:00
    Associated disk group: fifteen




    Physical Disk path redundancy: Lost
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,030 RPM
    Current data rate: 3 Gbps
    Product ID: HUS156030VLS600
    Firmware version: E516
    Serial number: JTWAZWXL
    Vendor: HITACHI
    Date of manufacture: Not Available

    Physical Disk at Enclosure 1, Slot 1


    Status: Optimal

    Mode: Assigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:cc:a0:0f:42:15:c8:00:00:00:00:00:00:00:00
    Associated disk group: fifteen




    Physical Disk path redundancy: Lost
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,030 RPM
    Current data rate: 3 Gbps
    Product ID: HUS156030VLS600
    Firmware version: E516
    Serial number: JTW5AP1L
    Vendor: HITACHI
    Date of manufacture: Not Available

    Physical Disk at Enclosure 1, Slot 2


    Status: Optimal

    Mode: Assigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:cc:a0:0f:38:65:58:00:00:00:00:00:00:00:00
    Associated disk group: fifteen




    Physical Disk path redundancy: Lost
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,030 RPM
    Current data rate: 3 Gbps
    Product ID: HUS156030VLS600
    Firmware version: E516
    Serial number: JTW00H4L
    Vendor: HITACHI
    Date of manufacture: Not Available

    Physical Disk at Enclosure 1, Slot 3


    Status: Optimal

    Mode: Assigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:cc:a0:0f:3e:a1:84:00:00:00:00:00:00:00:00
    Associated disk group: fifteen




    Physical Disk path redundancy: Lost
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,030 RPM
    Current data rate: 3 Gbps
    Product ID: HUS156030VLS600
    Firmware version: E516
    Serial number: JTW3ETGL
    Vendor: HITACHI
    Date of manufacture: Not Available

    Physical Disk at Enclosure 1, Slot 4


    Status: Optimal

    Mode: Unassigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:cc:a0:0f:4c:bf:98:00:00:00:00:00:00:00:00
    Associated disk group: None




    Physical Disk path redundancy: Lost
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,030 RPM
    Current data rate: 3 Gbps
    Product ID: HUS156030VLS600
    Firmware version: E516
    Serial number: JTWB6GTL
    Vendor: HITACHI
    Date of manufacture: Not Available

    Physical Disk at Enclosure 1, Slot 5


    Status: Optimal

    Mode: Unassigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:cc:a0:0f:42:50:8c:00:00:00:00:00:00:00:00
    Associated disk group: None




    Physical Disk path redundancy: Lost
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,030 RPM
    Current data rate: 3 Gbps
    Product ID: HUS156030VLS600
    Firmware version: E516
    Serial number: JTW5GLBL
    Vendor: HITACHI
    Date of manufacture: Not Available

    Physical Disk at Enclosure 1, Slot 6


    Status: Optimal

    Mode: Unassigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:cc:a0:0f:4c:bc:d4:00:00:00:00:00:00:00:00
    Associated disk group: None




    Physical Disk path redundancy: Lost
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,030 RPM
    Current data rate: 3 Gbps
    Product ID: HUS156030VLS600
    Firmware version: E516
    Serial number: JTWB692L
    Vendor: HITACHI
    Date of manufacture: Not Available

    Physical Disk at Enclosure 1, Slot 7


    Status: Optimal

    Mode: Unassigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:cc:a0:0f:41:ef:c8:00:00:00:00:00:00:00:00
    Associated disk group: None




    Physical Disk path redundancy: Lost
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,030 RPM
    Current data rate: 3 Gbps
    Product ID: HUS156030VLS600
    Firmware version: E516
    Serial number: JTW584LL
    Vendor: HITACHI
    Date of manufacture: Not Available

    Physical Disk at Enclosure 1, Slot 8


    Status: Optimal

    Mode: Unassigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:cc:a0:0f:4c:b6:5c:00:00:00:00:00:00:00:00
    Associated disk group: None




    Physical Disk path redundancy: Lost
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,030 RPM
    Current data rate: 3 Gbps
    Product ID: HUS156030VLS600
    Firmware version: E516
    Serial number: JTWB5VRL
    Vendor: HITACHI
    Date of manufacture: Not Available

    Physical Disk at Enclosure 1, Slot 9


    Status: Optimal

    Mode: Unassigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:cc:a0:0f:4c:b9:d4:00:00:00:00:00:00:00:00
    Associated disk group: None




    Physical Disk path redundancy: Lost
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,030 RPM
    Current data rate: 3 Gbps
    Product ID: HUS156030VLS600
    Firmware version: E516
    Serial number: JTWB62WL
    Vendor: HITACHI
    Date of manufacture: Not Available

    Physical Disk at Enclosure 1, Slot 10


    Status: Optimal

    Mode: Unassigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:cc:a0:0f:3d:61:20:00:00:00:00:00:00:00:00
    Associated disk group: None




    Physical Disk path redundancy: Lost
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,030 RPM
    Current data rate: 3 Gbps
    Product ID: HUS156030VLS600
    Firmware version: E516
    Serial number: JTW2SG0L
    Vendor: HITACHI
    Date of manufacture: Not Available

    Physical Disk at Enclosure 1, Slot 11


    Status: Optimal

    Mode: Unassigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:cc:a0:0f:42:81:7c:00:00:00:00:00:00:00:00
    Associated disk group: None




    Physical Disk path redundancy: Lost
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,030 RPM
    Current data rate: 3 Gbps
    Product ID: HUS156030VLS600
    Firmware version: E516
    Serial number: JTW5KVDL
    Vendor: HITACHI
    Date of manufacture: Not Available

    Physical Disk at Enclosure 1, Slot 12


    Status: Optimal

    Mode: Unassigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:cc:a0:0f:4c:62:84:00:00:00:00:00:00:00:00
    Associated disk group: None




    Physical Disk path redundancy: Lost
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,030 RPM
    Current data rate: 3 Gbps
    Product ID: HUS156030VLS600
    Firmware version: E516
    Serial number: JTWB08ML
    Vendor: HITACHI
    Date of manufacture: Not Available

    Physical Disk at Enclosure 1, Slot 13


    Status: Optimal

    Mode: Unassigned
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:cc:a0:0f:4c:b9:8c:00:00:00:00:00:00:00:00
    Associated disk group: None




    Physical Disk path redundancy: Lost
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,030 RPM
    Current data rate: 3 Gbps
    Product ID: HUS156030VLS600
    Firmware version: E516
    Serial number: JTWB629L
    Vendor: HITACHI
    Date of manufacture: Not Available

    Physical Disk at Enclosure 1, Slot 14


    Status: Optimal

    Mode: Hot spare standby
    Raw capacity: 279.397 GB
    Usable capacity: 278.897 GB
    World-wide identifier: 50:00:cc:a0:0f:4c:b8:a4:00:00:00:00:00:00:00:00
    Associated disk group: None




    Physical Disk path redundancy: Lost
    Physical Disk type: Serial Attached SCSI (SAS)

    Speed: 15,030 RPM
    Current data rate: 3 Gbps
    Product ID: HUS156030VLS600
    Firmware version: E516
    Serial number: JTWB60EL
    Vendor: HITACHI
    Date of manufacture: Not Available

    DRIVE CHANNELS----------------------------

    SUMMARY


    CHANNEL PORT STATUS
    1 In,Out,Expansion Optimal
    2 Expansion Optimal

    DETAILS

    DRIVE CHANNEL 1

    Port: In, Out, Expansion
    Status: Optimal
    Max. Rate: 3 Gbps
    Current Rate: 3 Gbps
    Rate Control: Switched
    DRIVE COUNTS

    Total # of attached physical disks: 30
    Connected to: A (left), Port In
    Attached physical disks: 15
    Expansion enclosure: 1 (15 physical disks)
    Connected to: 0, Port Expansion
    Attached physical disks: 15
    Expansion enclosure: 0 (15 physical disks)


    CUMULATIVE ERROR COUNTS

    RAID Controller Module 0

    Baseline time set: 5/11/12 6:51:24 PM
    Sample period (days, hh:mm:ss): 4 days, 14:29:37
    RAID Controller Module detected errors: 0
    Physical Disk detected errors: 0
    Timeout errors: 0
    Total I/O count: 0

    RAID Controller Module 1

    Baseline time set: 5/11/12 6:51:24 PM
    Sample period (days, hh:mm:ss): 4 days, 14:29:37
    RAID Controller Module detected errors: 2
    Physical Disk detected errors: 44383
    Timeout errors: 34
    Total I/O count: 346869993

    DRIVE CHANNEL 2

    Port: Expansion
    Status: Optimal
    Max. Rate: 3 Gbps
    Current Rate: 3 Gbps
    Rate Control: Switched
    DRIVE COUNTS

    Total # of attached physical disks: 15
    Connected to: 1, Port Expansion
    Attached physical disks: 15
    Expansion enclosure: 0 (15 physical disks)


    CUMULATIVE ERROR COUNTS

    RAID Controller Module 0

    Baseline time set: 5/11/12 6:51:24 PM
    Sample period (days, hh:mm:ss): 4 days, 14:29:37
    RAID Controller Module detected errors: 0
    Physical Disk detected errors: 0
    Timeout errors: 0
    Total I/O count: 0

    RAID Controller Module 1

    Baseline time set: 5/11/12 6:51:24 PM
    Sample period (days, hh:mm:ss): 4 days, 14:29:37
    RAID Controller Module detected errors: 0
    Physical Disk detected errors: 16
    Timeout errors: 0
    Total I/O count: 265600582

    ENCLOSURES------------------------------
    RAID Enclosure 0 Overall Component Information



    Enclosure audible alarm: Disabled
    Enclosure path redundancy: OK
    Current physical disk types: SAS
    Part number: Not Available
    Serial number: BP6TF3J
    Vendor: DELL
    Date of manufacture: Not Available
    Asset tag: Not Available
    Chassis name: MD3000
    Service tag: BP6TF3J


    Batteries Detected: 2



    Battery status: Optimal
    Location: RAID Controller Module 0
    Age: 827 days
    Days until replacement: Not applicable
    Last learn cycle: May 7, 2012
    Next learn cycle: August 6, 2012
    Weeks between learn cycles: 13
    Part number: PN JY200
    Serial number: SN 0471178U5852
    Vendor: VN DELL
    Date of manufacture: September 1, 2007


    Battery status: Optimal
    Location: RAID Controller Module 1
    Age: 827 days
    Days until replacement: Not applicable
    Last learn cycle: May 7, 2012
    Next learn cycle: August 6, 2012
    Weeks between learn cycles: 13
    Part number: PN JY200
    Serial number: SN 0471178U5632
    Vendor: VN DELL
    Date of manufacture: September 1, 2007



    Power Supply/Cooling Fan Modules Detected: 2



    Power Supply/Cooling Fan module 2 status: Optimal
    Part number: 0MX838A00
    Serial number: CN179727B50YNG
    Vendor: DELL
    Date of manufacture: Not Available


    Power Supply/Cooling Fan module 1 status: Optimal
    Part number: 0MX838A00
    Serial number: CN179727B50YNN
    Vendor: DELL
    Date of manufacture: Not Available


    Power Supplies Detected: 2



    Power supply status: Optimal
    Location: Power supply module (right)
    Part number: 0MX838A00
    Serial number: CN179727B50YNG
    Vendor: DELL
    Date of manufacture: Not Available


    Power supply status: Optimal
    Location: Power supply module (left)
    Part number: 0MX838A00
    Serial number: CN179727B50YNN
    Vendor: DELL
    Date of manufacture: Not Available



    Fans Detected: 4



    Fan Status: Optimal
    Location: Fan module (left)


    Fan Status: Optimal
    Location: Fan module (left)


    Fan Status: Optimal
    Location: Fan module (right)


    Fan Status: Optimal
    Location: Fan module (right)




    Temperature Sensors Detected: 4



    Temperature sensor status: Optimal
    Location: Power Supply/Cooling Fan module 1


    Temperature sensor status: Optimal
    Location: Power Supply/Cooling Fan module 2


    Temperature sensor status: Optimal
    Location: RAID Controller Module 0


    Temperature sensor status: Optimal
    Location: RAID Controller Module 1




    Expansion Enclosure 1 Overall Component Information



    Enclosure audible alarm: Not manageable
    Enclosure path redundancy: Lost
    Current physical disk types: SAS
    Part number: Not Available
    Serial number: G7P123J
    Vendor: DELL
    Date of manufacture: Not Available
    Asset tag: Not Available
    Chassis name: MD1000
    Service tag: G7P123J


    EMM Modules Detected: 2



    EMM card status: Optimal
    Firmware version: A.03
    Configuration settings version: Not Applicable
    Maximum data rate: 3 Gbps
    Current data rate: 3 Gbps
    Location: A (left)
    Card communication: OK
    Product ID: MD1000
    Part number: 0JT517A01
    Serial number: G7P123J
    Vendor: DELL
    Date of manufacture: Not Available


    EMM card status: Optimal
    Firmware version: Not Available
    Configuration settings version: Not Applicable
    Maximum data rate: 3 Gbps
    Current data rate: Not Available
    Location: B (right)
    Card communication: OK
    Product ID: Not Available
    Part number: 0JT517A01
    Serial number: G7P123J
    Vendor: Not Available
    Date of manufacture: Not Available



    Power Supply/Cooling Fan Modules Detected: 2



    Power Supply/Cooling Fan module 2 status: Optimal
    Part number: 0MX838A00
    Serial number: Not Available
    Vendor: Not Available
    Date of manufacture: Not Available


    Power Supply/Cooling Fan module 1 status: Optimal
    Part number: 0MX838A00
    Serial number: Not Available
    Vendor: Not Available
    Date of manufacture: Not Available


    Power Supplies Detected: 2



    Power supply status: Optimal
    Location: Power supply module (right)
    Part number: 0MX838A00
    Serial number: Not Available
    Vendor: Not Available
    Date of manufacture: Not Available


    Power supply status: Optimal
    Location: Power supply module (left)
    Part number: 0MX838A00
    Serial number: Not Available
    Vendor: Not Available
    Date of manufacture: Not Available



    Fans Detected: 4



    Fan Status: Optimal
    Location: Fan module (left)


    Fan Status: Optimal
    Location: Fan module (right)


    Fan Status: Optimal
    Location: Not Available


    Fan Status: Optimal
    Location: Not Available




    Temperature Sensors Detected: 4



    Temperature sensor status: Optimal
    Location: Power Supply/Cooling Fan module 1


    Temperature sensor status: Optimal
    Location: Power Supply/Cooling Fan module 2


    Temperature sensor status: Optimal
    Location: EMM Module A (left)


    Temperature sensor status: Optimal
    Location: EMM Module B (right)




    MAPPINGS (Storage Partitioning - Enabled (1 of 4 used))-------------------


    Virtual Disk Name LUN RAID Controller Module Accessible by Virtual Disk status
    Access Virtual Disk 31 0,1 Host Group fifteen Optimal
    Access Virtual Disk 31 0,1 Host HostSpinM Optimal
    fifteen 0 1 Host HostSpinM Optimal
    Access Virtual Disk 31 0,1 Storage Array Optimal


    TOPOLOGY DEFINITIONS

    STORAGE ARRAY
    Default type: Windows Server 2003/Server 2008 Non-Clustered
    Host Port: 50:01:88:b1:4a:d4:dd:04


    Default Group
    Host Group: HostSpin


    Host Group: fifteen
    Host: fifteen
    Host type: Windows Server 2003/Server 2008 Non-Clustered
    Host port identifier: 50:06:05:b0:00:08:ab:20
    Alias: fifteen-b
    Host type: Windows Server 2003/Server 2008 Non-Clustered
    Host port identifier: 50:06:05:b0:00:08:a6:40
    Alias: fifteen-a

    Host: HostSpinM
    Host type: Windows Server 2003/Server 2008 Clustered
    Host port identifier: 50:02:6b:91:46:3f:5a:04
    Alias: HostSpinM0
    Host type: Windows Server 2003/Server 2008 Clustered
    Host port identifier: 50:02:6b:91:46:3f:5a:00
    Alias: HostSpinM1
    Host type: Windows Server 2003/Server 2008 Clustered
    Host port identifier: 50:01:88:b1:4a:d4:dd:00
    Alias: HostSpinM2
    NVSRAM HOST TYPE DEFINITIONS

    NOTE: The following indexes are not used: 3 - 15


    HOST TYPE AVT STATUS ASSOCIATED INDEX
    Linux Disabled 1
    Windows Server 2003/Server 2008 Clustered Disabled 2
    Windows Server 2003/Server 2008 Non-Clustered Disabled 0 (Default)
  • DELL-Sam L

    Community Manager

    •

    8147 Posts

    •

    34706 Points

    965

    0

    Posted May 16th, 2012 17:00

    Hello Conor McCarthy,

    I know you stated that you were trying to add the disk via SMCLI.  Do you get the same error when you try to add the drives via MDSM.  Let us know if there are any other issues.

  • 965

    0

    Posted May 17th, 2012 05:00

    Yes, I get the same error in MDSM.

  • 965

    0

    Posted May 21st, 2012 05:00

    Hello. Should I expect further response here?

  • DELL-Sam L

    Community Manager

    •

    8147 Posts

    •

    34706 Points

    965

    0

    Posted May 22nd, 2012 10:00

    Hello Conor,

    Sorry for the delay in response.  There are a few things that need to be confirmed as we are seeing disconnects coming from the MD1000 on those drives. 1. Your MD3000 is set for "unified" mode (switch in up position, single disk set light displayed on front).

    2. Your MD1000 is also in "unified mode"

    3. Ensure you have (2) EMM control modules installed in the MD1000.

    4. Make sure you are cabled correctly between the MD3000 and the MD1000. For redundant paths to work, you should have (2) cables, one from the out port on each of your MD3000 controllers (controller 0 and 1) connecting into the corresponding "in" port on each of the (2) EMMs on your MD1000.

    Here is a link to the cabling guide just in case you want to double check that your MD is cabled correctly the cable guide starts on page 23.

    support.dell.com/.../HOMA01EN.pdf

    Let us know if still having the same issue.  

  • 965

    0

    Posted May 24th, 2012 02:00

    Thank you Sam. I will try this.

  • 965

    0

    Posted May 29th, 2012 15:00

    Hi Sam. Check to all those.

    - MD3000 and MD1000 in unified mode.

    - two EMMs in MD1000

    - cabled up correctly with redundant paths (fixed since last post).

    I still get the same problem in both command line and via the UI. Where do we go next?

  • JimNim

    16 Posts

    257

    0

    Posted May 29th, 2012 17:00

    You must reboot the stack after adding the SAS connection that was missing before it will be used by the array. That cabling isn't designed to be hot pluggable so the connection doesn't initialize properly when added hot.

  • DELL-Sam L

    Community Manager

    •

    8147 Posts

    •

    34706 Points

    965

    0

    Posted May 29th, 2012 17:00

    Hello Conor,

    I took a deeper look at the log that you posted into the thread & I would suggest that you call in and open a support case.  The reason is that is that the profile that you posted is showing some concerns with redundancy.  

     1, 0        1                  Physical Disk path redundancy: Lost  

         1, 1        1                  Physical Disk path redundancy: Lost  

         1, 2        1                  Physical Disk path redundancy: Lost  

         1, 3        1                  Physical Disk path redundancy: Lost  

         1, 4        1                  Physical Disk path redundancy: Lost  

         1, 5        1                  Physical Disk path redundancy: Lost  

         1, 6        1                  Physical Disk path redundancy: Lost  

         1, 7        1                  Physical Disk path redundancy: Lost  

         1, 8        1                  Physical Disk path redundancy: Lost  

         1, 9        1                  Physical Disk path redundancy: Lost  

         1, 10       1                  Physical Disk path redundancy: Lost  

         1, 11       1                  Physical Disk path redundancy: Lost  

         1, 12       1                  Physical Disk path redundancy: Lost  

         1, 13       1                  Physical Disk path redundancy: Lost  

         1, 14       1                  Physical Disk path redundancy: Lost  

    Which are all - HUS156030VLS600

    All these drives are NOT showing a 2nd path to the drive, so only one RAID Controller can communicate to the drives.  Also The firmware on the MD1000 is NOT current.  It is at A.03 firmware and should be A.04.

    One other reason that you could be getting the error is that controller only has 512MB of RAM on it.  This error is literally the data parity stripe that it attempting to create / extend is too large for the RAM to utilize and still keep production active.  The work around is to literally destroy the Disk Group and create it the correct size needed.