UNSOLVED

ThatFridgeGuy

updated

3 months ago

0

6013

September 1st, 2004 15:00

W2K only sees 3gb of 4gb installed.

I have a PE6600 with 4gb of memory installed (8x512mb).  OpenManage reports 4096mb Total Installed Capacity but shows 3072mb as Total Installed Capacity Available to the OS.  Why is this and how can I get the other 1024mb available to my OS (W2K)?

By the way, the properties under my computer also shows 3072mb available.

Some other config info:  2 - PERC 3/DC, 1 - PERC 3/QC and 1 - AHA-39160 Ultra 160 Host Adapter installed.  Also there are 2 Pro/100 S Server adapters installed as well.

Thanks for the assistance...

Fridge

  • 140

    0

    Posted September 1st, 2004 16:00

    I missed the earlier posting "Not all 4GB avail to OS".  I was wondering about it possibly being the RAID controllers using some of the memory.

    Can anyone help me out with some info about why exactly the RAID controllers are using some of my installed memory and if this is at all configurable?  I have done some looking on the Dell website about this issue before posting my original message but have yet to find anything.

    Thanks,

    Fridge

  • Murr

    47 Posts

    140

    0

    Posted September 1st, 2004 17:00

    Have you seen the /3GB switch with more than 1 gigabyte of physical RAM?

    See

    http://support.microsoft.com/?id=266096

    Not sure of your OS - but hope it helps.